Page 2
ALV2 ALV2 SMALL SCREEN DTU Quick Reference Guide Lock programming: 1. Programming a new guest door lock 2. Programming a new lock as a common door 3. Programming a new special door lock 4. Programming a new non-guest door lock 5.
Page 3
LOCK PROGRAMMING 1. Programming a new guest door lock. 1. Turn on the DTU 2. Sign in with your staff code and password, then press Enter 3. Press the #1 button for R/C 4. Select F1 for Normal Mode 5. Select F4 for Data Mode 6.
Page 4
3. Programming a new special door lock. 1. Turn on the DTU 2. Sign in with your staff code and password, then press Enter 3. Press the #1 button for R/C 4. Select F1 for Normal Mode 5. Use the down arrow button to select the number of room type for the special door. The number is designated in the Setup/Room Type on the PC.
Page 5
5. Clearing a lock sequence: 1. Turn on the DTU 2. Sign in with your staff code and password, then press Enter 3. Press the #1 button for R/C 4. Select F1 for Normal Mode 5. Select F3 for Clear Mode 6.
Page 6
8. Select the date range to view 9. Use up/down arrows to view the card or DTU errors on the lock 8. Emergency open using the DTU: (You can use an emergency card as another option.) 1. Turn on the DTU 2.
Page 7
11. Opening a lock when batteries have died: 1. Connect the Emergency battery pack to the bottom of lock 2. Wait about 30 seconds and then use a valid management card 3. You do not want to slide a Guest card because you do not know the time and date on the lock 4.
Need help?
Do you have a question about the ALV2 and is the answer not in the manual?
Questions and answers