Do you have a question about the WFL 1300XD and is the answer not in the manual?
Questions and answers
J.R. MONTAG 361 564-6156
February 9, 2025
laTCH ON DOOR SPLENDADA WASHER ARWF129W BROKE HOW TO RELEASE LATCH TO OPEN DOOR
1 comments:
Mr. Anderson
February 11, 2025
To release the door latch on a Splendide WFL 1300XD washer:
1. Locate the tab near the door latch. 2. Unscrew and remove the screw holding the tab in place. 3. Pull outward using the tab until the plastic tie-rod is freed from its stop position. 4. Pull downward while opening the door at the same time.
Ensure the panel is repositioned securely after releasing the latch.
This answer is automatically generated
Connie
July 22, 2025
Timer light blinking and machine stopped after 2 minutes
Electrical Technical information Operating instructions 6-7-8 Control panel Wash cycle table Product description Detergent dispenser drawer Bleach cycle WFL 1300XD Wash cycles Display First-time use Daily use Pausing a cycle Opening the door, if necessary Changing a running wash cycle...
WASHER SAFETY Do not use replacement parts that have not been recommended by the manufacturer (e.g. parts made at home using a 3D printer). No washer can completely remove oil. Turn off water faucets when appliance is not in use to relieve pressure on hoses and valves and to minimize leakage if a break or rupture occurs.
For RV or marine applications, please visit the Splendide website or call 1-800-356-0766 for the available installation kits. For closet installations, door ventilation is not required. NOTE: If the washer will be installed with a stacked dryer, refer to your dryer’s User Manual for ventilation requirements.
CONNECTING WATER INLET If the water pipes you will be connecting to are new or unused, run the 1. Screw the cold water fill hose (C blue water until clear to remove any debris that could clog the water valve connector) onto the cold water supply screens or valves before connecting the machine.
OPERATING INSTRUCTIONS THANK YOU FOR PURCHASING A SPLENDIDE PRODUCT To receive more comprehensive assistance, register the appliance on www.splendide.com CONTROL PANEL 1. SUPER WASH / MUTE button 2. POST CYCLE CARE / KEY LOCK button 3. ON/OFF button 4. PREWASH button and indicator light DISPLAY 5.
WASH CYCLES The duration of the available wash cycles and the remaining time of a running cycle appear in section A (Factors such as load size, modifiers, options selected, Follow the instructions on the symbols of the garment’s wash and water pressure may affect the time shown in the display. care label.
PAUSING A CYCLE Empty the pockets: Objects such as coins or lighters can damage the washing machine and To pause the wash cycle, press the START/PAUSE button again. To start the drum. Check all buttons. the wash cycle from the point at which it was interrupted, press and hold ACCESSORIES the START/PAUSE button again.
CLEANING & MAINTENANCE Do not use flammable fluids to clean the washing machine. Cleaning the outside of the washing machine NOTE: Use of more liquid chlorine bleach than is The outer parts and rubber components of the appliance can be recommended above could cause washer damage over time.
CLEANING THE MESH FILTERS IN THE WATER INLET VALVES Attach one inlet hose to the water faucet. Screw on coupling by Close water tap and unscrew the inlet hose. hand until it is seated on washer. Use pliers to tighten couplings NOTE: Never use second-hand hoses.
TRANSPORT AND HANDLING Do not lift the washing machine by holding it at the worktop. Turn off the water, and unplug the washer. removing the transport bolts in the “Installation Instructions” in Make sure that door and detergent dispenser are properly closed. reverse order.
TROUBLESHOOTING Your washing machine could occasionally fail to work. Before contacting the Technical Assistance Service, make sure that the problem cannot be easily solved using the following list. WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.
Page 13
Water pressure is too low. Washer takes longer time Voltage supplied to the machine is too low. than shown on the machine’s Excessive foam. display. An unbalanced load may cause the machine to adjust multiple times before performing a spin. The display shows fault code The door needs to be opened between every 3 consecutive cycles.
OCCURS, GET IN TOUCH WITH THE NEAREST rating plate that can be found behind the door). AFTER-SALES SERVICE To receive assistance, call our Splendide Technical Service/ Assistance Department toll-free at 1-800-356-0766 or email us at service@westlandsales.com. When contacting our Client After sales service, always specify: •...
RV/MARINE WINTERIZATION SPECIAL WINTERIZATION INSTRUCTIONS FOR RV/MARINE INSTALLATIONS: To Winterize your Clothes Washer Optional Winterization To use your washer again, Instructions If you’re currently pumping anti- 1. With washing machine power 1. If applicable, reconnect water OFF, pour ½ quart of RV-type an- freeze through your fresh water inlet hoses to corresponding system, you can follow these...
(USA & CANADA ONLY) WHO IS COVERED BY THIS WARRANTY 3. Failure of or damage to the Splendide Product if it is altered, THAT REPAIR OR REPLACEMENT AS DESCRIBED ABOVE, SPLENDIDE This limited one-year warranty (“Warranty”) is given only to the...
Need help?
Do you have a question about the WFL 1300XD and is the answer not in the manual?
Questions and answers
laTCH ON DOOR SPLENDADA WASHER ARWF129W BROKE HOW TO RELEASE LATCH TO OPEN DOOR
To release the door latch on a Splendide WFL 1300XD washer:
1. Locate the tab near the door latch.
2. Unscrew and remove the screw holding the tab in place.
3. Pull outward using the tab until the plastic tie-rod is freed from its stop position.
4. Pull downward while opening the door at the same time.
Ensure the panel is repositioned securely after releasing the latch.
This answer is automatically generated
Timer light blinking and machine stopped after 2 minutes