Table of Contents
Advertisement
Quick Links
Mk4 Pairing Instructions
March 2016
HouseMatePro Mk4 Pairing Instructions
This guide describes how to pair HouseMatePro Mk4 hardware with an Android or iOS device.
ClickToPhone App
It assumes that you have already installed the
on your Android device and
HouseMate Home Control App
the
on your iOS device.
Please note that if you wish to reboot the HouseMate for a different platform you need both an iOS
and Android device. The HouseMate is shipped booted for Android unless requested otherwise.
Unique Perspectives Ltd.
Page 1 of 8
www.housemate.ie ● info@housemate.ie
Distributed by Technical Solutions Australia
Ballyline ● Callan ● Co. Kilkenny ● Ireland
tecsol.com.au
Phone: +353 56 7725913 ● Fax: +353 56 7725936
Advertisement
Table of Contents
Summary of Contents for HouseMate HouseMatePro Mk4
- Page 1 HouseMate Home Control App on your iOS device. Please note that if you wish to reboot the HouseMate for a different platform you need both an iOS and Android device. The HouseMate is shipped booted for Android unless requested otherwise.
- Page 2 You will be brought to the phone’s bluetooth settings page. Step 1: Pairing HouseMatePro Mk4 1. Ensure that bluetooth on your phone is switched on. 2. Make sure HouseMatePro is off. This is important to ensure that there will be sufficient time for the pairing and connect process to complete correctly.
- Page 3 7. Now the window will appear with instructions on how to pair the HID component within HouseMatePro Mk4. At the same time the software will start trying to connect to your hardware. You must wait at this step until the ClickToPhone status Connecting to Hardware…...
- Page 4 Settings->Preferences->Bluetooth Setup- >Advanced Settings->Reboot for iOS 2. Enter the password “apple” 3. You will be asked to unpair the HouseMate HID Mouse before the reboot can take place. This is because the HID must be reconfigured as a bluetooth keyboard –...
- Page 5 If you intend to use the touch-screen only then you can click and jump to step 5 below. Step 1: Pairing the HouseMate Switch The first step is to pair the HouseMate Switch. This switch is used to drive the iOS scanning. When you are ready choose Settings and you will be brought to the iOS Settings page.
- Page 6 Select Item action. Step 4: Enable & optimize Switch Control This is the last step to set up the HouseMate switch to drive the iOS scanning. Navigate back to Switch Control. Unique Perspectives Ltd. Page 6 of 8 www.housemate.ie ●...
- Page 7 Auto Scanning Time, Loops and so on. Take some time exploring these different options so that the scanning can be optimized to suit the user’s needs and abilities. When you are finished, return to the HouseMate app for the final step of setting up your hardware.
- Page 8 >HouseMate hardware->Hardware Settings->Factory Reset 2. Enter the word “factory” 3. You will be asked to unpair the HouseMate Switch before the reboot can take place. This is because the HID must be reconfigured as a bluetooth mouse – HouseMate HID Mouse.
Need help?
Do you have a question about the HouseMatePro Mk4 and is the answer not in the manual?
Questions and answers