Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Efento Gateway
Summary of Contents for Efento Gateway
- Page 1 Efento Gateway User manual V 1.0 16.07.2020...
-
Page 2: Overview
The device may be powered by USB power supply (5V, 1A) or by PoE (802.3af). Efento Gateway sends the sensor data over REST protocol (HTTPS or HTTP). The range of Efento Gateway is up to 100 meters i n the open space and 20 –... -
Page 3: Table Of Contents
Table of contents Overview Technical data Configuration Mobile application Web browser Status Sensors Settings Network settings Server settings Sending data to Efento Cloud Sending data to a custom server Standalone mode Proxy Encryption Password Reset... -
Page 4: Configuration
Select it from the list and key in the password that is on the Gateway enclosure (the default password is a dmin ) . The application will connect to the gateway and you will have access to all the settings. -
Page 5: Web Browser
Web browser Connect Efento Gateway to your computer and change computer’s IP address to an address from subnet 192.168.120.0/24 (e.g. 192.168.120.2, subnet mask 255.255.255.0) and set it on the network card, to which Efento Gateway is connected. Open an Internet browser on your computer and go to address 192.168.120.89 (default Efento Gateway IP address). -
Page 6: Sensors
Efento Cloud. The measurements taken by a sensor are saved and buffered in the gateway's memory. In that case, the sensor is marked in blue. If you click on the sensor, you can see the measurements on a chart, table or export them as a txt or csv file. If you want to integrate the... -
Page 7: Settings
(described in further parts of the manual). Settings Network settings In the network settings tab you can configure the gateway to allow it to connect to the Internet and send the data to Efento Cloud or any other cloud platform / server. -
Page 8: Sending Data To A Custom Server
You can set Efento Gateway to send the data to a custom server. Efento Gateway will send the data over http / https (REST API - POST). In order to set the gateway to work with a custom server, in the “Connection to server”... - Page 9 X-Api-Token: < v alue of the “Token” field > If you want to, you can set the gateway to use custom headers. In order to do that, set the “custom headers” toggle to “ON” and add the header name(s) and its value(s). You can add up to five custom headers.
-
Page 10: Api
Token: s dffsWED34sdfFG6wddV3 Please note, that the messages sent by the server to the gateway may not contain more than ten headers. Any value above that, will be treated as wrong value and gateway will not accept this message. - Page 11 // sensor channel number: 1/2/3 "type" : [string], / / temperature / humidity / pressure / pressure_diff / open-close "value" : [string] Examples of the messages sent by Efento Gateway to the server: "measurements" : [ "serial" : "282C024FFFB1", "response_handle": 1, "battery"...
- Page 12 Server should always answer with “ 2 01 Created ” to a message sent by Efento Gateway. Otherwise, the gateway will consider the message as not received by the server and will resend it in a loop. Moreover, the server should include in the message body the list of the IDs of accepted sensors along with the information, if the gateway should synchronize the measurements of these sensors with the server (ID of each sensor is sent by the gateway in the JSON in the “...
-
Page 13: Standalone Mode
Users can log in to the gateway through a web browser, access the measurements and export the data in the form of a csv file. To set the gateway to the standalone mode set the “Connection to server”... -
Page 14: Password
In the “Reset” tab, you can: ● Restart the gateway - the device will switch off and on again. It will not restore the default settings ● Reset the gateway - the device will restore factory default settings. All the configuration changes will be...