Do you have a question about the RDU and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Vapac RDU
Page 1
These instructions contain operating information and should be left with the unit. ROOM DISTRIBUTION UNITS Installation & Operation Manual Edition 3.0 Installation in countries covered by EC Directives: This product will meet the requirements of the Low Voltage Safety Directive 73 / 23 EEC and the EMC Directive 89 / 336 EEC when installed in accordance with the instructions contained in this manual.
Page 2
Introduction: The range of “Room Distribution Units” (RDU’s) are designed to be mounted directly on top of a “Vapac Steam Humidifier”. Essentially they consist of a stainless steel manifold, and a number of axial fans contained in a metal box. The steam manifold distributes the steam evenly across the face of the fans, which blow air over the plumes of steam, in order that the steam is absorbed quickly into the conditioned space.
Page 3
Remove the RDU cover by removing the six screws – 3 each side – and lifting the cover clear. • Place the RDU on top of the Vapac Unit, so that the steam outlet of the unt and the steam inlet of the RDU are aligned.
Need help?
Do you have a question about the RDU and is the answer not in the manual?
Questions and answers