Aerisa AerBrush 01 Installation, Operation & Maintenance Manual

Aerisa AerBrush 01 Installation, Operation & Maintenance Manual

Advertisement

INSTALLATION, OPERATION
& MAINTENANCE MANUAL
AERISA
AerBrush (01, 02, 03 & 04)
04/20

INTRODUCTION

The Aerisa model AerBrush utilizes needle point brush type ionization in order to produce positive and
negative oxygen ions. This equipment is highly effective at reducing odors, airborne pathogens and
particulates by introducing the +/- O
ions into occupied spaces through existing air handling equipment
2
and ductwork. The unit is designed to be installed within an AHU, a fan coil unit, PTAC, heat pump or
even in a ductless split system. The AerBrush is fully self-contained, housed within an ABS plastic
enclosure and comes complete with mounting "wings". The unit can come with 12V DC, 24V AC, 120V
AC or 230V AC all without having to utilize an external power supply device.
Aerisa
1214 W. Boston Post Road, Suite 410, Mamaroneck, NY 10543
Tel: 480-302-6300
www.aerisa.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AerBrush 01 and is the answer not in the manual?

Questions and answers

Summary of Contents for Aerisa AerBrush 01

  • Page 1 AerBrush (01, 02, 03 & 04) 04/20 INTRODUCTION The Aerisa model AerBrush utilizes needle point brush type ionization in order to produce positive and negative oxygen ions. This equipment is highly effective at reducing odors, airborne pathogens and particulates by introducing the +/- O ions into occupied spaces through existing air handling equipment and ductwork.
  • Page 2 2 brushes simultaneously. See figures 1& 2. 4. The unit should be mounted downstream of the filter. 5. For best results avoid locations directly after a cooling coil or humidifier. Aerisa 1214 W. Boston Post Road, Suite 410, Mamaroneck, NY 10543 Tel: 480-302-6300...
  • Page 3 1. The supply fan is running and that the green light illuminates. 2. Check the power input connections to the ionization unit. Verify all connections are correct and tightened. Reconnect any loose wires as necessary. Aerisa 1214 W. Boston Post Road, Suite 410, Mamaroneck, NY 10543 Tel: 480-302-6300...
  • Page 4 5. Apply power to unit. Confirm that green indicator light illuminates and that the dry contacts indicate that the ionizer is functioning properly. MAINTENANCE Given good particulate filter maintenance, there is no maintenance required on the AerBrush unit. Aerisa 1214 W. Boston Post Road, Suite 410, Mamaroneck, NY 10543 Tel: 480-302-6300 www.aerisa.com...

This manual is also suitable for:

Aerbrush 02Aerbrush 03Aerbrush 04

Table of Contents