Dell PowerEdge 15FP Installation Manual page 12

F i g u r e 1 - 4 .
At the back of the cabinet, pull back on the mounting-bracket flange until the
3
mounting hooks are located in their respective square holes, and then push down on
the mounting-bracket flange until the mounting hooks seat in the square holes and
the push button pops out and clicks.
Repeat step 1 through step 3 for the slide assembly on the other side of the rack.
4
1-8
I n s t a l l a t i o n G u i d e
I n s t a l l i n g t h e R a p i d R a i l s S l i d e A s s e m b l i e s
10-32 x 0.5-inch flange-head Phillips screws and
front of rack
centering washers (2 sets per slide assembly); optional
NOTE: Ensure that the rails are mounted at the same position on the vertical rails on each
side of the rack.
slide assemblies (2)
push button
mounting hook
hole for optional screw
mounting-bracket flange
support tab