Page 1: Table Of Contents
TABLE OF CONTENTS 2 Storage and Carrying Overview 3 System Adjustments Overview 4 Play Seat Adjustment 5 Creek Seat Adjustment 6 Foot Brace Adjustment 7 Foot Brace Outfitting 8 Freestyle Foot Brace; Thigh Brace Adjustment 9 Hip Pad Adjustment 10 Ethos Hip Pad Adjustment 11 Seat Shim Adjustment;...
Page 2 STORAGE OVERVIEW GEAR LOOPS (4) 1. Your Wave Sport CORE WhiteOut seat system has multiple gear attachment and storage points located across the system. HULL BEAM STORAGE WELL GEAR LOOP 2. A strap and buckle gear system is located at RESCUE THROW BAG the bow position of the hull beam.
Page 3: System Adjustments Overview
SYSTEM ADJUSTMENT OVERVIEW • SEAT ADJUSTMENT BACKBAND THIGH BRACE HIP PAD BACKBAND ADJUSTER Allows for comfortable seat positioning (creek UPPER BACKBAND or play style seats). STRAPS • FOOT BRACE ADJUSTMENT KNOBS WITH TETHER (L/R) Allows for comfortable, positive foot position adjustment (see p.
Page 4: Play Seat Adjustment
PLAY SEAT ADJUSTMENT 1. Unfasten the upper backband bungee cords. 2. Loosen the seat adjustment knob by turning UPPER BACKBAND five to six times but DO NOT remove it. BUNGEE CORDS 3. With both hands positioned as shown, press straight downward on the rear adjustment knob and slide the seat assembly fore or aft to the desired location.
Page 5: Creek Seat Adjustment
CREEK SEAT ADJUSTMENT 1. Loosen, but DO NOT remove, five seat adjustment screws. 2. With both hands, slide the seat assembly fore or aft to the desired location. STEP OUT WALL Tighten five adjustment screws securely. SEAT ADJUSTMENT SCREW SEAT ADJUSTMENT SEAT ADJUSTMENT SCREWS SCREWS...
Page 6: Foot Brace Adjustment
FOOT BRACE ADJUSTMENT FOOT CUP FOOT CUP TO ADJUST BULKHEAD AND FOOT CUPS 1. Remove both adjustment knobs. 2. Remove both rails from the positioning studs and re-position to the desired location based upon your comfort. Note: Make sure you have outfitted the foot braces with the desired level of foam padding and are wearing preferred paddling gear to attain proper final positioning.
Page 7: Foot Brace Outfitting
FOOT BRACE OUTFITTING VELCRO VELCRO 1. Position the foam wedge over the Velcro ® ® ® on the foot brace. Note: Make sure the thick end of the wedge is positioned toward the hull surface of the boat. 2. Using the template (visit WaveSport.com to download) and a cutting tool, trim the foam pad to fit over the foam wedge.
Page 8 FREESTYLE FOOT BRACE 1. Add/remove foam shims to achieve desired comfort. 2. Place in boat and check for comfort and fit. PRO TIP - Use a foam rasp or course sandpaper to shape the foam to customise your foot position. THIGH BRACE ADJUSTMENT THIGH BRACE SET SCREW 1.
Page 9: Hip Pad Adjustment
HIP PAD ADJUSTMENT HIP PAD 1. Disconnect hip pad strap from buckle. BUCKLE FOAM HIP PAD 2. Swing hip pad upward. SHIM STRAP 3. Insert foam padding into the pocket on the back of the hip pad. 4. After you have inserted as much foam padding as desired, reseal and lower hip pad, Velcro in desired position.
Page 10: Ethos Hip Pad Adjustment
PRO TIP - ETHOS hip pads are designed to make the cockpit more roomy and comfortable for carrying. Ethos hip pads can be replaced with traditional Wave Sport hip pads for a tighter fit. Contact your dealer for more details.
Page 11 SEAT SHIM ADJUSTMENT 1. Disconnect the retaining bands beneath the front corners of the seat pad. 2. Slip the seat foam shim beneath the seat pad. Reveal the adhesive strips to keep it in place. SEAT SHIM 3. Re-connect the retaining bands beneath the front corners of the seat pad.
Page 12 PRO TIP - The thigh brace outer wing provides improved support and control. Remove it from each thigh brace only when your thighs need additional room. Wave Sport Kayaks Bellbrook Industrial Estate, Uckfield E.Sussex, TN22 1QQ, UK. www.WaveSport.com © 2016 Wave Sport...

Wave Sport CORE WHITEOUT OUTFITTING Adjustment Manual

Quick Links

TABLE OF CONTENTS

Summary of Contents for Wave Sport CORE WHITEOUT OUTFITTING