GENERAL SPECIFICATIONS The BALDR 330 is a portable battery pack with the ability to supply 330W of pure sine wave AC power via the onboard AC output. Additionally, The BALDR 330 is able to support USB quick charging via the onboard 1 x USB-C port and 3 x USB-A ports. Overall storage capacity is 297Wh of energy.
Page 3
• DO NOT use BALDR 330 or AC Wall plug power adapter, if it is damaged or has been modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
USB-C Output DC Input Air Intake Vent with Cooling Fan Note: No user-serviceable parts inside. Recommended to fully charge the BALDR 330 before use. BUTTON FEATURE BALDR 330 Power ON/OFF Button SOS mode & LED light Button DC Output Power ON/OFF Button...
From Car Port 12V 7-9 hours when car running From Wall Charger 110V 5-7 hours DO NOT CONNECT DEVICE VIA AC OUTPUT PORT WHILE CHARGE THE BALDR 330. RECOMMEND TO DISCONNECT THE BALDR 330 WHEN FULLY CHARGED. WHAT IT POWERS Laptops (41.4Wh) 32"...
Second, DOUBLE-Press to turn on the SOS mode; Third, press Button B back to LED light, one more time again, will turn off the light. 10 seconds after you turn off the Button B, BALDR 330 will have a BEEP sound indication. DC OUTPUT POWER ON/OFF C The DC output port will NOT function until the appropriate Button A &...
Page 7
Note that when you first plug in a power source, whether it's a solar panel or a wall charger, the BALDR 330 may take a minute to detect and adjust its charge circuitry before it starts drawing power from the source.
Page 8
LCD Screen will automatically shut down when no outputs are activated. BALDR 330 will enter sleep mode after 120 seconds of inactivity (no new output load detected), and will "wake up" when inputting a charging cord or when any button is pressed.
Page 9
BALDR 330 performance and service life. Keep away from corrosion chemicals and gases. After taking out of storage, visually inspect to make sure BALDR 330 and all accessories look satisfactory. This increase review the intake and exhaust side vents to ensure they are clear of debris.
• Confirm that the wall plug power adapter's cord is inserted fully into the DC Input • Confirm that the AC wall plug power adapter is the charger provided with BALDR 330. • If the input does not comply with the requirements located in the GENERAL...
If a valid claim is made during the applicable period, BALDR, at its option, will either (1) replace the product, or (2) exchange the product with a product that is of equal value. A replacement product assumes the remaining warranty of the original product or ninety (90) days from the date of replacement, whichever is greater.
Need help?
Do you have a question about the 330 and is the answer not in the manual?
Questions and answers