D) Manual Edit - Night Owl WNVR Series User Manual

7.2.2 (d)
Manual Edit
Camera: Select the camera you want to edit.
Protocol: Shows the protocol of the selected camera. Private (Night Owl),
ONVIF (Standard).
IP Address: Network address of the connected camera.
Port: Allows access to your camera with your computer through your LAN or the
Internet. The default value is 80.
Audio Format: Audio codec used for the two-way audio communication. The
default value is G711a but G711u can also be used.
Enable: Will Enable (turn on) and Disable (turn off) the camera video stream.
MAC Address: The unique identifier assigned to the network interface of the
camera for communications at the data link layer.
Username: Shows the username of the credentials needed to establish a
connection with the camera. By default, admin.
Preview Stratage: Used for live view. If the signal of the connected camera to the
NVR is not strong enough to sustain a decent quality image, this function can adjust
the mainstream transmission to improve video quality.
Password: Shows the password of the credentials needed to establish a
connection with the camera. By default, password field should be empty.
Image Rollover: Will invert or reestablish the video image from the selected camera.
Chapter 7: 53
Menus and Settings