1. Manuals
  2. Brands
  3. DREAMVISION Manuals
  4. Projector Accessories
  5. BEST 3D Passive
  6. Assembly and calibration

DREAMVISION BEST 3D Passive Assembly And Calibration

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
BEST - 3D Passive Kit
ASSEMBLY AND CALIBRATION
www.dreamvision.net
Ref: R1048214-222
Rev: 01
Part. No.: R699825

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BEST 3D Passive and is the answer not in the manual?

Questions and answers

Summary of Contents for DREAMVISION BEST 3D Passive

  • Page 1 BEST - 3D Passive Kit ASSEMBLY AND CALIBRATION www.dreamvision.net Ref: R1048214-222 Rev: 01 Part. No.: R699825...
  • Page 2 If the purchaser or third party caries out modifications or repairs on goods delivered by Dreamvision, or if the goods are handle incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will...

  • Page 3: Table Of Contents

    Download the BEST 3D passive Kit setup TEST PATTERNs............4 Passive 3D screen that maintains light polarization ................4 Attach the BEST 3D passive Kit to the projector ................4 Connect the BEST 3D passive Kit to the projector ................6 POSITION AND ALIGNMENT ..................

  • Page 4: Installation

    50% brighter than with the active sets but also smoother and more natural to the eyes. The BEST 3D passive Kit is installed in front of the projector. Avoid direct sun light and make sure to install it in a place with a good ventillation.
  • Page 5 M5x10 Fix the U-shape support to the mounting plate using the 6-pan screw. c) Use the 2 screws (M4x20) to fix the BEST 3D passive Kit to the projector. M4x20 Attach the BEST 3D passive Kit to the projector using the 2 M4x20 screws.

  • Page 6: Connect The Best 3D Passive Kit To The Projector

    1.5 Connect the BEST 3D passive Kit to the projector Use the Jack 3.5mm stereo to VESA miniDin-3 cable to connect the “Sync” input of the BEST 3D passive Kit to the “3D Synchro” signal output located at the back of the projector.

  • Page 7: Position And Alignment

    LCD window, without blocking light in the borders. To do so, place the BEST 3D passive Kit at the maximum distance possible and moves it toward the projector until the light path is centered and entirely contained into the LCD window.
  • Page 8 If the projector uses a small zoom (>2.0 throw ratio distance), the modulator will be located farther from the projector. Then adjust the vertical position to center the light path into the BEST 3D passive Kit as described below. Correct vertical position Tighten the 2 wheels B when the light path is at the center of the modulator.

  • Page 9: Step 2: Moir Artifacts And Focus

    HDMI 1 HDMI 2 COMP. VIDEO S-VIDEO LENS LENS ASPECT HIDE TEST LIGHT MENU BACK PICTURE MODE CINEMA CINEMA CINEMA NATURAL STAGE DYNAMIC USER1 USER2 Alter slightly the picture focus to eliminate the moiré artifacts. R699825 - BEST 3D passive Kit...

  • Page 10: Step 3: Vertical And Horizontal Tilt Setting (Important)

    2.3 STEP 3: Vertical and Horizontal Tilt setting (important) Ideally, the BEST 3D passive Kit should be perfectly perpendicular to the light path, that means if you use the projector offset to center the picture into your screen, you will need to set an initial tilt on the 3D passive modulator.

  • Page 11: Lens Flare

    To completely remove the lens flare, tilt the BEST 3D passive Kit in order to change the lens flare position and to move it out of the screen. Preferably move it outside the screen through one of the four circles number 8, 13, 78 or 83.
  • Page 12 If the tilt required to pull out the lens flare through circle 8 is above 7°. Select a different circle: 78 by example. Make sure that the additional Vertical and Horizontal tilts never exceed 7°. R699825 - BEST 3D passive Kit...

  • Page 13: Step 4: Check The 3D Performances

    2.4 STEP 4: Check the 3D performances To check the 3D performances of the BEST 3D passive Kit, you can use TEST PATTERN 4b or directly by viewing a 3D program. To use the TEST PATTERN 4b, please follow the steps below: •...

  • Page 14: Led Troubleshoot

    4.0 MAINTENANCE AND CLEANING Avoid direct sun light and water contact with the BEST 3D passive Kit. This device must be in a place with good ventillation. Clean the BEST 3D passive Kit lens periodically, or whenever you notice smudges or too much dust on the crystal surface.
  • Page 15 Contact Information: TEC - Dreamvision 7, rue LACAILLE, 75017 Paris - FRANCE Web: www.dreamvision.net...
  • Page 16 Contact information TEC - DreamVision 7, rue La Caille, 75017 Paris, France www.dreamvision.net Part. No. R699825...

Table of Contents