AVLink VRM-12AW User Manual

AVLink VRM-12AW User Manual

Video/audio

Advertisement

VIDEO/AUDIO
Selector
(VRM-12AW)
(VRM-14AW)
USER MANUAL
VRM-12AW / VRM-14AW
Package Contents -
1 AVLINK VRM-12AW or VRM-14AW Selector
1 user manual
2 screws
4 foot pads

1 remote control cable

Any thing missed, please contact with your vendor.

Features

Video:
 Resolution up to 1920x1440.
 Pixel frequency up to 250MHz.
 Supports the DDC2B, DDC2B+, DDC2AB.
 Hot pluggable.
Audio:
 Operation Frequency: 50Hz~15KHz.
 Max. Audio Input: 2.5Vp-p.
 Input Connector: 3.5φmini-stereo jack.

Specification

Function
Video Input
Connector
(HD-15 Female)
Video Output
Connector
(HD-15 Female)
Audio Input
Connector
(3.5φ Mini-Stereo Jack)
Audio Output
Connector
(3.5φ Mini-Stereo Jack)
LEDs
On Line
CTRL Connector
VGA Resolution
Housing
Weight
Dimensions (LxWxH)

Hardware Requirements

V1.0
Monitor
One highest resolution VGA, SVGA,
(Projector)
Multisync, PLASMA monitor or projector.
PC
One VGA, SVGA or Multisync card.
Cable
Standard cable.
VRM-12AW
VRM-14AW
2
4
1
2
4
1
2
4
MD-6 (Female)
1920 x 1440
Metal
300g
455g
150x84x25mm 230x84x25mm
Requirement specifications
-1-

Front View

1. CTRL
Connected "Remote Control Cable" and switch Input
port.
2. Video Output Connector
3. Audio Output Connector
4. Port LEDs
Green LEDs light up while the PC has successfully
been selected.
5. Power Supply(SPARE)

Rear View

1. Video Input Connector
2. Audio Input Connector
Remote Control Cable
1. Port LEDs
Red LEDs light up while the PC has successfully been
selected.
2. Port Selection Switches (Manual type)
Press the switch to access the chose PC.
-2-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VRM-12AW and is the answer not in the manual?

Questions and answers

Summary of Contents for AVLink VRM-12AW

  • Page 1 Red LEDs light up while the PC has successfully been Cable Standard cable. selected.  1 AVLINK VRM-12AW or VRM-14AW Selector  2. Port Selection Switches (Manual type) 1 user manual Press the switch to access the chose PC. ...
  • Page 2 Installation 1. Turn off the PC and monitor. 2. Connect the HD-15 video cable between the “video output” of PC and “video in” port of the video/audio Selector. 3. Connect the 3.5φaudio cable between the audio output device and the “audio in” port of video/audio Selector.

This manual is also suitable for:

Vrm-14aw

Table of Contents