User Manual: Toshiba-TMPM330
Chapter 1: Introduction
The TMPM330 is an evaluation stamp board which is exploring the complete features of the new
ARM Cortex-M3 TMPM330FDFG microcontroller by Toshiba.Featuring a Toshiba TMPM330FDFG
microcontroller, the MCBTMPM330 Evaluation Board offers 512KB Flash, 32KB SRAM, a 10 channel
16-bit Timer, a 12 channel 10-bit ADC, real-time clock and watchdog, 3 UARTs, 3 I2C interfaces and
79 GPIO Pins.
TMPM330 Stamp Specifications
•
Dimensions: 64.26 mm x 49.53 mm
•
Two layer PCB (FR-4 material)
•
USB mini connector ( as power source) with power indicator
•
On-board linear regulators generate +3.3V/1A from power supply
•
Extension headers for all Micro-controller pins
•
One RS232 port connector
•
256Kb I2C based EEPROM
•
10 JTAG connector
•
On-board two test LED's
•
On-board user and reset switches
Chapter 2: CoFlash Installation & Flashing Binary codes
2.1:Installation & Configuration of CoFlash software
Follow the steps given below.
Step 1: Open CoFlash-1.4.6.exe setup downloaded from internet.
Page | 3