POLTI Sanisystem Protocol For Use

WARNING! THIS PROTOCOL DOES NOT REPLACE THE INSTRUCTIONS
AND WARNINGS CONTAINED IN THE USER MANUAL AND ON
THE APPLIANCE: PLEASE READ THEM BEFORE USE.
• Before starting the treatment, clean - if necessary - the surfaces and fabrics with the most
appropriate method for removing dirt and dust.
• If your appliance is equipped with steam adjustment - as it can also be used as a steam cleaner
- set it to an average level or, in the presence of preset programs, refer to the instruction manual.
• Heating the dispenser: when the appliance is first switched on, dispense "unusable" steam
for about 30 seconds downwards to reach the optimum operating temperature and pressure.
After each pause before treating surfaces or fabrics, dispense for a few seconds in the same way.
DEEP DISINFECTION
Objects and surfaces more
exposed to frequent and
continuous contact
(e.g. handles, counters, taps ...)
FREQUENT SANITIZING
ACTION
PROTOCOL FOR
HOW TO USE THIS APPLIANCE
CHOOSE THE OPERATION YOU WANT TO DO:
Dispense steam perpendicular
1
10 centimetres (spacer stand)
USE
to the surface keeping
a maximum distance of
for 30 consecutive seconds.
The steam will be able to
treat an area with a diameter
of about 10 cm.
Dispense steam with slow
and repeated strokes from
right to left (or vice versa),
or from top to bottom
(or vice versa) at about
10 centimetres per second.