Download Print this page

Kane KANE77 Manual page 3

Carbon monoxide monitor and personal co alarm

Advertisement

OPERATING INSTRUCTIONS
Once the monitor is switched on every accepted button press is accompanied
by an audible beep.
ON/OFF
The KANE77 is operated by a single button for ON and OFF. It is designed for
use in ambient air, ranging in temperature from 0 to 40°C (32 to 104°F). When
the unit is switched ON by pressing and holding the ON button (Only switch ON
outdoors or where no CO is present), it automatically zeros in 50 seconds.
During countdown the display shows time remaining as two digits.
Be sure to switch on in fresh air well away from boiler flues, vehicle exhausts,
smokers and any other potential sources of CO.
Turn ON Countdown
The countdown starts at 50. When the countdown reaches 00 the meter will set
its sensor to zero and display CO concentration using three digits. A battery
level indicator will appear in the top left hand of the screen and "ppm" will
appear in the bottom right hand of the screen
Normal Display
CO ppm
Hold down
for two seconds to switch the meter OFF.

Advertisement

loading