Lattice CSI2 to Parallel Bridge Board User Manual
  1. Manuals
  2. Brands
  3. Lattice Manuals
  4. Transmitter
  5. CSI2 to Parallel Bridge Board
  6. User manual

Lattice CSI2 to Parallel Bridge Board User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CSI2 to Parallel Bridge Board
User's Guide
February 2013
Revision: EB81_01.1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CSI2 to Parallel Bridge Board and is the answer not in the manual?

Questions and answers

Summary of Contents for Lattice CSI2 to Parallel Bridge Board

  • Page 1  CSI2 to Parallel Bridge Board  User’s Guide February 2013 Revision: EB81_01.1...

  • Page 2: General Description

    The CSI2 to Parallel Bridge Board comprises a compact, low cost, MIPI CSI2 (Camera Serial Interface) image sen- sor, lens and lens housing with adjustable focus, that can bolt directly onto the Lattice HDR-60 Base Board or the MachXO2™ Dual Sensor Interface Board. Both the CSI2 to Parallel Bridge Board and the MachXO2 Dual Sensor Interface Board are designed to work together.

  • Page 3: Electrical, Mechanical, And Environmental Specifications

    When reaching for the boards, it is recommended that you first touch the outside shield portion of the J11 BNC connector on the HDR-60 Base Board. If the CSI2 to Parallel Bridge Board is not installed on the HDR-60 Base Board, then when reaching for the CSI2 to Parallel Bridge Board, it is recommended that you first touch the outside edge of the mounting holes on the CSI2 to Parallel Bridge Board.

  • Page 4: Functional Description

    Voltage Regulators The CSI2 to Parallel Bridge Board power is supplied by the 5V DC power applied at connectors J7 and J8, pins 1, 2, 39 and 40. The on-board linear voltage regulators then provide the necessary supply voltages to power the sen- sor: 2.7V, VDDIO, 1.2V, 1.8V, 2.5V and 3.3V.
  • Page 5 CSI2 to Parallel Bridge Board User’s Guide Figure 2. CSI2 to Parallel Bridge Board with Sony IMX169 CSI2 Sensor J253: • Short Pins 3 to 4 MEMS Oscillator (Y2) As shown in Figure 2, J5 is set such that the IMX169 sensor will receive a clock input signal from the internal 27.000 MHz MEMS oscillator (Y2).

  • Page 6: Ordering Information

    • QS010, LatticeECP3 Video Camera Development Kit QuickSTART Guide Ordering Information The CSI2 to Parallel Bridge Board is designed solely for use with the MachXO2 Dual Sensor Interface Board and/or the HDR-60 Video Camera Development Kit. Description Ordering Part Number...

  • Page 7: Revision History

    01.1 Clarify that CSI-2 is for use with MachXO2. © 2013 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.

  • Page 8: Appendix A. Schematic

    CSI2 to Parallel Bridge Board User’s Guide Appendix A. Schematic Index...
  • Page 9 CSI2 to Parallel Bridge Board User’s Guide Block Diagram USED USED...
  • Page 10 CSI2 to Parallel Bridge Board User’s Guide Bottom Conn Connections...
  • Page 11 CSI2 to Parallel Bridge Board User’s Guide 12C Bypass Connection USED...
  • Page 12 Bank2 and Bank3 USED LED15 PART_NUMBER = SML-512MWT86 Green USED SONY SENSOR...
  • Page 13 Bank0 and Bank1 USED USED...
  • Page 14 Regulator Connections...
  • Page 15 Level Translator Connections...
  • Page 16 Sensor Power and Decaps USED SONY SENSOR...
  • Page 17 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Lattice LF-C2P-EVN...

Table of Contents