Summary of Contents for Integra SWIVEL HI DINING CHAIR 6281
Page 1
INTEGRA SWIVEL HI DINING CHAIR Assembly Instructions Use the system S fittings (S) to secure the arms to the arm supports. Then bolt the rear of the arm to the upright using 2x 50mm (2”) bolt & barrel (B). Bolt the back...
Page 2
INTEGRA SWIVEL HI DINING CHAIR Hardware Checklist 10 x 50mm (2”) Bolt and Barrel Connect the arm support onto the front of the seat with the 8 x 30mm (1”) Gauge Screws holes facing outwards using 2 x 75mm (3”) bolt &...
Page 3
INTEGRA SWIVEL HI DINING CHAIR Component Checklist Assemble the furniture on a soft surface. 2 x Top Leg Brace Bolt the leg braces to one leg frame using 4 x 50mm (2”) 1 x Lower Leg Brace bolt & barrel (B) with the barrel holes facing inwards.
Page 4
BEFORE ASSEMBLY How to use fittings Bolt and Barrel Step 1: Insert barrel and line up Fix the bearing on slot towards bolt using a the top of the leg screwdriver. assembly using 4 Step 2: Insert bolt through hole x screws (X).