Recessed over door heater, complete with remote switch unit for fan only, 3, 2 and 1kw (4 pages)
Summary of Contents for CEH RCHB 4200
Page 1
Reference J241d Installation Instructions The RCHB 4200 Ceiling heater for surface mounting Complete with REMOTE SWITCH UNIT for Fan only, 4.5 and 2.25kW Please retain for future reference Commercial Electric Heat Limited Burnfoot Industrial Estate HAWICK Roxburghshire TD9 8SL Tel 01450 372103 Fax 01450 377800...
Page 2
SAFETY The correct procedures for working at height must be adopted when installing this heater. The heater must be installed by a suitably qualified person in accordance with current regulations. CONTENTS Remove from carton and check contents ; - heater unit - ODH-RSW three switch control unit LOCATION The heater must be installed at a minimum of 2 m and a maximum of 3m from the floor.
Page 3
FIXING This heater is designed for surface installation to any ceiling that can adequately support the unit. The unit weighs 9kgs. Remove the front cover of the unit Fixings are made through the top flat section of the heater body using the 4 No 5mm holes provided. This section must be flat on the ceiling as the edges of the cover are designed to fit against the ceiling.
Page 4
Please keep these instructions for future reference...