Summary of Contents for iStarUSA WA-FANAC120
- Page 1 WA-FANAC120 Installation Guide Package Contents Fan Guard x2 Cooling Fan x2 Red Wires x2 Power Cord Screw Set Nut x8 Screw x8 Washer x8 TEL 626.303.8885 FAX 626.301.0588 727 Phillips Drive City of Industry, CA 91748 www. istarusa.com...
- Page 2 Plug in the red wires onto the connectors at the same position on the fans Connect the connectors on power cord and red wires. The connectors are interchargeable. Take off eight scerws which are indicated by red circles TEL 626.303.8885 FAX 626.301.0588 727 Phillips Drive City of Industry, CA 91748 www. istarusa.com...
- Page 3 Put the fan on the top of fan guard, and then secure the fans onto the rack with screw, washers, and nuts. Make sure the side with sticker needs to face up! TEL 626.303.8885 FAX 626.301.0588 727 Phillips Drive City of Industry, CA 91748 www. istarusa.com...
- Page 4 Screws go from top of the rack and washers/nuts go to the bottom of fan guard inside the rack, and then use screw driver to secure the fans on the rack. Finishing Look TEL 626.303.8885 FAX 626.301.0588 727 Phillips Drive City of Industry, CA 91748 www. istarusa.com...
Need help?
Do you have a question about the WA-FANAC120 and is the answer not in the manual?
Questions and answers