EMS FC-60-1000 Technical Bulletin

WIRELESS
EMS Universal
Supply for Radio Cluster
Communicators
EN54-4
The FC-60-1000 Universal power supply has been
newly launched for use in EMS current and future
product ranges.
These products include
Communicator used on the FireCell range for radio
device communications.
The power supply has been developed for use in
the Fire alarm market place and as expected the
unit is fully certified to the EN54-4 standard and
has third party certification.
General Specification
The power supply is internally housed in
the Radio Cluster Communicator as per
previous product revisions.
Input Voltage 220-240v ac 50Hz.
6v dc output voltage to the Radio Cluster
Communicator pcb.
Charging voltage for the internal 6v 4Ah
battery.
Provides the Radio Cluster Communicator
with a 72 hour standby time.
Mounting possible in either orientation to
allow mains entry from the left or right
hand side of the product.
Can be used as a straight replacement for
previous 113117 versions of RCC power
supplies. Refer to the instruction manual
TSD042 for full details.
Page 1 of 2
FIRE DETECTION
Power
(RCCs)
the Radio Cluster
©
A full product technical specification is
shown to the rear of this document.
MK118 Issue 3 September 2015