1. Manuals
  2. Brands
  3. Etan Manuals
  4. Tent
  5. SunnyTent Manual Cross Pole SetOval
  6. Manual

Etan SunnyTent Manual Cross Pole SetOval Manual

Hide thumbs
1
2
3

Advertisement

Table of Contents

Manual Cross Pole Set Oval SunnyTent
1. This (double) cross-pole set gives your oval SunnyTent extra strength. It fits under the middle section of
your oval SunnyTent, providing additional support.
2. With this cross-pole set, the middle section of your SunnyTent will be extra secure, making the tent
stronger (in wind) and will look great. Note: Due to its size, the oval SunnyTent is wind sensitive. This
cross-pole set makes the tent a bit stronger, but our recommendation remains, that that the oval tent is
only suitable for sheltered / wind free locations. Also, this tent should not be used in winter or autumn.
3. Always follow the operating instructions of your SunnyTent as described in the manual.
A. Contents Box
a. 2 fibre glass pole sets
b. 2 plastic hoses
c. 2 metal ground pipes
d. 2 metal connection pins
e. 2 plastic filler sleeves

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SunnyTent Manual Cross Pole SetOval and is the answer not in the manual?

Questions and answers

Related Manuals for Etan SunnyTent Manual Cross Pole SetOval

Summary of Contents for Etan SunnyTent Manual Cross Pole SetOval

  • Page 1 Manual Cross Pole Set Oval SunnyTent 1. This (double) cross-pole set gives your oval SunnyTent extra strength. It fits under the middle section of your oval SunnyTent, providing additional support. 2. With this cross-pole set, the middle section of your SunnyTent will be extra secure, making the tent stronger (in wind) and will look great.
  • Page 2 B. Installation 1. Assemble the pole sets (a) and push them into the hoses (b). Make sure that the poles sets are completely inserted into the hoses. Please note: Never pull the poles set, only push them. This prevents you from pulling the poles sets apart while inserting them into the hose. 2.
  • Page 3 C. Disassembly 1. Loosen the 3 straps from the 2 pole sets, so that they are free. 2. With two people, remove the pole sets / hoses (one-by-one) from the connection forks. 3. You can leave the pole sets in the hoses and store them in a clean / dry place. If you want to remove the poles from the hoses, see step 6.

Table of Contents