Disconnect all Electrical Power before installing the HAF Fan Mounting Bracket
Locate packing slip and make sure that all listed parts are enclosed. If not, call your Hired-Hand distributor
immediately. Please read and understand all instructions in this manual before installing HAF Fan Bracket.
TOOLS REQUIRED
Screwdriver
INSTRUCTIONS
STEP 1
Lay the Fan on a flat surface and install the
small hooked end between the inner ring of guard
and motor. See Figures 1 and 2.
STEP 2
Press against the bracket to squeeze
support hooks through the wires in the guard.
Make sure that a support falls between the
two support hooks. See Figure 2. Pull up on
the bracket to seat hooks.
STEP 3
Insert screw through hole in Bracket. This will
prevent Bracket from vibrating loose.
STEP 4
Hang fan in secure place.
HIRED-HAND MFG., INC. • 1733 Co Rd 68 • Bremen, Alabama 35033 • Phone 256-287-1000 • Fax 265-287-2000
Manual Part Number 4801-0106 Rev. 12-06
HAF Fan Mounting Bracket Installation
WARNING
!
IMPORTANT!
PART NUMBERS
Pliers
Part Number
0404-3213
Install Small
Hooked End in
the Fan housing.
HAF Fan Mounting Bracket
Quan.
1
FAB GS Brkt mtn hanging HF-20
Figure 1
HAF Fan Mounting Bracket
Figure 2
HAF Fan with Mounting Bracket
Description
Small Hooked
End
Page 1 of 2