Advertisement
WaterQuick Premier
Hot Water Delivery System
Installation and Operating Instructions for:
Traditional Tank Style Water Heaters
With dead-end water lines
Before starting the installation please carefully read all the instructions. If the
instructions are not followed the equipment may not work properly and property
damage may occur. If you have any questions give us a call Monday through Sunday
7:00 am to 7:00 pm Pacific Time.
Page 1 of 9
Advertisement
Table of Contents
Summary of Contents for Faster Hot Water WaterQuick Premier
- Page 1 WaterQuick Premier Hot Water Delivery System Installation and Operating Instructions for: Traditional Tank Style Water Heaters With dead-end water lines Before starting the installation please carefully read all the instructions. If the instructions are not followed the equipment may not work properly and property damage may occur.
-
Page 2: Table Of Contents
Package Contents Please check the components carefully to make sure no damage has occurred to the WaterQuick Premier Hot Water Delivery System. Care should be taken to ensure that the pump is NOT dropped or mishandled (the pump will be damaged if dropped). -
Page 3: Operational Parameters
Operational Parameters The maximum allowable water temperature for the WaterQuick Premier is 150° F. WaterQuick Premier ™ Tank Style Water Heaters - Installation Instructions WaterQuick Premier can be used with both tank style water heaters and tankless water heaters. These instructions are for installation on a tank style water heater. - Page 4 Step 6. Install Flow Monitor: Insert washer into female end of Flow Monitor and carefully screw onto water heater hot water discharge nipple with arrow pointing up in the direction of flow (one extra washer is included with Flow Monitor). Note: Flow Monitor can be installed in the cold water line.
- Page 5 Step 8. Turn on water: a. Make sure that a hot water faucet is turned on in the house and then slowly turn the water back on to the water heater. Check for leaks and repair as necessary. Leave the water running until all of the air has been purged from the water pipes.
-
Page 6: Bridge Valve Installation
Advanced Bridge Valve Installation ™ Location: The Advanced Bridge Valve should be installed under the kitchen or bathroom sink at the farthest fixture from the water heater. Branched plumbing systems will need an Advanced Bridge Valve at the end of each line. -
Page 7: Bridge Valve Operation
Step 5. Attach other end of advanced supply lines to the appropriate "Cold Water In" and "Hot Water In" ports of the Advanced Bridge Valve. Tighten finger tight plus a quarter turn with a wrench. Do not over tighten. Step 6. Attach standard 1/2"... -
Page 8: Operation Instructions
For warranty service, call (619) 665-2077 for a return authorization number. Then, ship your unit to our factory, freight and insurance prepaid, with proof of date of original purchase. Please include a note stating the problem. Faster Hot Water will repair it, or replace it, and ship it back to you prepaid. - Page 9 3. This warranty does not cover any equipment that is installed or used outside the United States of America and Canada. LIMITATIONS AND EXCLUSIONS: FASTER HOT WATER WILL NOT BE RESPONSIBLE FOR ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Need help?
Do you have a question about the WaterQuick Premier and is the answer not in the manual?
Questions and answers