Installation - Kedacom KSCA120 Series Quick Start Manual

Face self-check access system
Hide thumbs Also See for KSCA120 Series:
Table of Contents

Advertisement

V. Installation
[Note]
Please make sure the environment meets requirements before installation. For detailed instructions for
the installation environment, please refer to the Appendix.
If install the device indoor, it should be at least 2m away from the light source and at least 3m from the window
and door to avoid direct sunlight.
Please make sure the illumination of the light source in the environment is over 100 Lux.
The recommended installation height is 1.5m from the ground to the device lens, or you can adjust the height
according to human height.
Recommended installation height:
1.5m from the ground to the lens
9
1.5m

Advertisement

Table of Contents
loading

Table of Contents