Advertisement
WARNING: At least two people should work together for easy assembly.
Step One
Attach the Front Legs (1) and Rear Legs (2)
to each end of the Top Cross Bar (3).
Secure them with Washers (24),
Bolts (15) & Bolts End Caps (26),
Nuts (22) & Nut Caps (28).
Tighten only enough to hold the parts
in place. Do not tighten completely at this time.
Some latter adjustments may be necessary
to ensure the parts are aligned properly.
The Bolts End Caps and Nut Caps can only
be attached when all Bolts and Nuts are tightened.
Step Two
Assemble the two Side Leg Braces
(5) & Rear Cross Bar (4) to
the Rear Legs (2);
Secure them with Washers (25),
Bolts (17) & Bolt End Caps (27),
Nuts (23) & Nut Caps (29).
Please note the Rear Legs are placed
between the Leg Braces (5) and Rear Cross Bar (4).
Assemble the front Part of the Side Leg Braces (5)
to the Front Legs (1) using Washers (25),
Bolts (19) & Bolt End Caps (27),
Nuts (23) & Nut Caps (29).
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd.
3 Seat Swing Hammock
Step by step assembly instructions
Note: Don't tighten nuts before every bolt is in place.
Don't tighten the nuts before all parts are aligned properly.
Assembly Instructions
www.royalcraft.co.uk
5 / 8
Advertisement
