Advertisement
READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT
• For adult use only. This product is not a toy, keep away from children.
• Do not stare directly at the light emitted by this product.
• This product is resistant to water, but it is not designed to be completely submerged. Submersion could cause water to
enter the product causing damage to the electronics.
• Do not replace the batteries while in the pool.
• Do not sit, straddle, or step on the product.
FOLLOW THESE RULES AND ALL INSTRUCTIONS TO AVOID INJURY OR PROPERTY DAMAGE.
General Information and Maintenance Instructions:
• Best for pools up to 18 feet (549cm) in diameter.
• This product operates on four (4) AAA size batteries (not included).
• Alkaline batteries are recommended. Rechargeable batteries are okay to use.
• Remove batteries if light is not to be used for an extended period of time.
• Do not mix old and new batteries. Do not mix alkaline, standard (Carbon - Zinc), or rechargeable (Nickel - Cadmium)
batteries.
• Dry any water on the product prior to battery installation. Remove used batteries promptly. Replace all 4 batteries at
the same time.
• Always purchase the correct size and grade of battery most suitable for the intended use. Ensure batteries are installed
correctly with regard to polarity (+ and -). Clean the battery contacts and also those of the device prior to battery
installation.
• To clean the product, use only a damp cloth. Avoid strong cleaner, excessive water and abrasive brush.
SAVE THESE INSTRUCTIONS
®
INTEX
OWNER'S MANUAL
LED FLOATING POOL LIGHT
WARNING
Page 1
(243IO) LED FLOATING POOL LIGHT ENGLISH 7.25" X 4.875" 04/26/2016
Model FL690
243
IO
243-*IO-R0-1704
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Intex FL690
Summary of Contents for Intex FL690
- Page 1 (243IO) LED FLOATING POOL LIGHT ENGLISH 7.25” X 4.875” 04/26/2016 ® INTEX OWNER'S MANUAL LED FLOATING POOL LIGHT Model FL690 READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT WARNING • For adult use only. This product is not a toy, keep away from children. • Do not stare directly at the light emitted by this product. • This product is resistant to water, but it is not designed to be completely submerged. Submersion could cause water to enter the product causing damage to the electronics. • Do not replace the batteries while in the pool. • Do not sit, straddle, or step on the product.
- Page 2 (243IO) LED FLOATING POOL LIGHT ENGLISH 7.25” X 4.875” 04/26/2016 Parts reference: REF. NO. DESCRIPTION QTY. SPARE PART NO. BATTERY HOUSING 11753 T-SHAPE RING 11754 LIGHT BODY 11755 To install or replace batteries: 1. Dry product completely. Unscrew the battery housing from the light body in a counter-clockwise direction (see Fig 1). 2. Insert 4 AAA size batteries following the orientation shown on the battery holder (see Fig 2). 3. Reinstall the battery housing by aligning the groove on the battery housing with the ridge on the light body (see Fig 3). 4. Using a clockwise motion, securely tighten the battery housing by hand only (see Fig 4). Fig 1 Fig 2 Fig 4 Fig 3 Due to a policy of continuous product improvement, Intex reserves the right to change specifications and appearance, which may result in updates to the instruction manual without notice. SAVE THESE INSTRUCTIONS Page 2...
- Page 3 (243IO) LED FLOATING POOL LIGHT ENGLISH 7.25” X 4.875” 04/26/2016 Operation Instructions: 1. ON/OFF push button: turns the light ON and OFF, and for lighting mode selection (see Fig 5). 2. Turn on the light and place the light on the pool water surface with the ON/OFF push button facing up. Do not immerse the product in water. Press Button once twice three times four times Mode (Brightness) *Battery life 4 hours 40 hours 3 hours *Approximate and based on 4 AAA fresh alkaline batteries. Fig 5 NOTE:After 2 hours of continuous use, the device will automatically switch off to save energy. Troubleshooting guide: Q. What should I do if the product does not light up? A. 1. Check the battery housing to ensure 4 AAA batteries are installed correctly with regard to polarity (+ and -). 2. Check that the battery housing is snug (hand tightened). 3. Replace the batteries. Q. What should I do if the light emitted by this product is too weak? A. 1. Clean outside surface of the light housing using a soft damp cloth. Note: the light housing is an optical component, to avoid any scratches do not use any hard or abrasive rag to clean it.
- Page 4 (243IO) LED FLOATING POOL LIGHT ENGLISH 7.25” X 4.875” 04/26/2016 Limited Warranty Your LED FLOATING POOL LIGHT has been manufactured using the highest quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. This Limited Warranty applies to the LED FLOATING POOL LIGHT only. This limited warranty is in addition to, and not a substitute for, your legal rights and remedies. To the extent that this warranty is inconsistent with any of your legal rights, they take priority. For example, consumer laws across the European Union provide statutory warranty rights in addition to the coverage you receive from this limited warranty: for information on EU-wide consumer laws, please visit the European Consumer Center website at http://ec.europa.eu/ consumers/ecc/contact_en/htm. The provisions of this Limited Warranty apply only to the original purchaser and are not transferable. This Limited Warranty is valid for a period of one (1) year from the date of the initial retail purchase. Keep your original sales receipt with this document, as proof of purchase will be required and must accompany warranty claims or the Limited Warranty will be invalid. If you find a manufacturing defect in the LED FLOATING POOL LIGHT during the warranty period, please contact the appropriate Intex Service Center listed in the separate “Authorized Service Centers” sheet. If the item is returned as directed by the Intex Service Center, the Service Center will inspect the item and determine the validity of the claim. If the item is covered by the provisions of the warranty, the item will be repaired or replaced, with the same or comparable item (at Intex’s choice) at no charge to you. Other than this warranty, and other legal rights in your country, no further warranties are implied. To the extent possibly in your country, in no event shall Intex be liable to you or any third party for direct or consequential damages arising out of the use of your LED FLOATING POOL LIGHT, or Intex or its agents’ and employees’ actions (including the manufacture of the product). If your country does not allow the exclusion or limitation of incidental or consequential damages, this limitation or exclusion does not apply to you. You should note that this limited warranty does not apply in the following circumstances: • If the LED FLOATING POOL LIGHT is subject to negligence, abnormal use or application, accident, improper operation, improper voltage or current contrary to operating instructions, improper maintenance or storage; • If the LED FLOATING POOL LIGHT is subject to damage by circumstances beyond Intex’s control, including but not limited to, ordinary wear and tear and damage caused by exposure to fire, flood, freezing, rain, or other external environmental forces; • To parts and components not sold by Intex; and/or. • To unauthorized alterations, repairs or disassembly to the LED FLOATING POOL LIGHT by anyone other than Intex Service Center personnel. Injury or damage to any property or person is not covered by this warranty. Read the owner’s manual carefully and follow all instructions regarding proper operation and maintenance of your LED FLOATING POOL LIGHT. Always inspect your product prior to use. This limited warranty will be void if use instructions are not followed. SAVE THESE INSTRUCTIONS Page 4...
Need help?
Do you have a question about the FL690 and is the answer not in the manual?
Questions and answers