Download Print this page
Laser SPK-TT830 Instruction Manual

Laser SPK-TT830 Instruction Manual

Turntable with cd and cassette deck

Advertisement

Quick Links

Turntable with CD and Cassette Deck
Model Number: SPK-TT830
Model Number: PXRC5CD
INSTRUCTION MANUAL

Advertisement

loading

Summary of Contents for Laser SPK-TT830

  • Page 1 Turntable with CD and Cassette Deck Model Number: SPK-TT830 Model Number: PXRC5CD INSTRUCTION MANUAL...
  • Page 3: Safety Precautions

    Safety Precautions Read the following recommended safety precautions carefully. Power Source Before plugging in for the first time, read the following section carefully. This device should be operated only from a 220-240V AC, 50 Hz outlet. Be sure that the power supply voltage of the area be used meets the required voltage and you select the correct voltage setting for your device.
  • Page 6 Perguntas frequentes Se tiver problemas com a unidade, leia os seguintes FAQs antes de contactar o suporte pós-vendas. Problema Solução Certifique-se de que o cabo de alimentação da unidade está ligada Unidade não liga a uma tomada elétrica adequada e a tomada de parede está ligada. Rode o botão ligação / volume no sentido dos ponteiros do Não há...
  • Page 8: Parts List

    Parts List Front and side view Top View...
  • Page 9 1. Display Panel 2. Stop: Stop playback in CD/USB/SD modes; stop recording. USB/SD: Switch to USB or SD card modes. 3. Record/Delete 4. Repeat/Program 5. Speakers (Stereo) 6. Function Knob: Rotate the knob to select PHONO, CD, AUX, or RADIO. 7.
  • Page 13 tape’ r n attrac t exc orce. S or a er ra r a a r zer F e ’...
  • Page 14 V n Re or recor roove . recor ter rat record. recor awa r ry, co recor t av Stor recor t. ecor r zon dwarp. tor recor car. Stor recor temperatur replac ty. Pr record. W celerat record . T av ’...
  • Page 15 Remo S ylus “A”. owar “B”. S ylus owar “C”. owar “D” Tip.
  • Page 16 A Pow Cor Cover ops. ops.
  • Page 17: Playing A Record

    Playing a Record Important: To avoid stylus damage, make sure the included stylus guard is in place whenever the turntable is being installed, moved and cleaned. speed: 33 1/3, 45, 78 RPM according to the vinyl being played. When playing a 45 RPM record, use the included 45 adaptor. you are playing a 33 RPM record and you want the turntable to stop turning when the record is finished.
  • Page 18: Playing A Cassette

    automatically. If it is set to OFF, the record will not stop automatically. Tone Arm and gently move it back to its rest position. protect it from accidental movement. Turn the Power knob to switch the unit OFF. Unplug it from the power supply if it is not going to be used for a while.
  • Page 19 Playing a CD ▲ ‖ To Suspend Playback Temporarily ‖ ‖ ■ To Skip to the Next or Previous Track ▎ ▎...
  • Page 20 ▎ ▎ ‖ ▎ ▎ ▎ ▎ ▎ ▎ ▎ ▎ ‖ ■...
  • Page 21 , ▎ ▎ ‖ ■...
  • Page 22 ■ ■ ‖ ▎ ▎ ▎ ▎ ■...
  • Page 23 Encoding and Recording onto a USB Device/SD Card insert a CD into a CD player connected to the AUX IN socket. playing your traditional music media. Playing Music from an Auxiliary Input Playing via the 3.5mm AUX-IN Jack 3.5mm AUX-IN Jack on the front panel of the unit and the other end to...
  • Page 24 distortion. device.
  • Page 25 FAQ’s If you are experiencing any problems with the unit, read through the following FAQ’s before you contact after sales support. Problem Solution Make sure that the unit’s power cord is connected to an appropriate Unit will not power electrical outlet and the wall socket is switched on. Rotate the power/volume knob clockwise to There is no sound increase the volume.
  • Page 26 SPECIFICATION VALUE Power Power input AC 220-240V Power consumption Dimensions 460x335x245mm Ampli er& Speaker 2x3W Output power Frequency response 60-20,000Hz Speaker impedance 35dB S/N radio Tuner 88MHz -108Mhz FM frequency range 530MHz-1600MHz AM frequency range USB&SD Card 32GB Maximum capacity FAT32 File system playback MP3,WMA...
  • Page 27: Warranty Conditions

    Product and a copy of your receipt. Laser will cover the cost of the return delivery. Step 4: Wait for us to contact you. Once we have received your defective Laser Product for inspection, we will inform you of our assessment of your claim within 7 days. When we contact you, we will firstly let you know...