Novatek CBS Series Operation And Maintenance Manual

Vacuum blasting workheads for contained blast systems
Hide thumbs Also See for CBS Series:

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CBS Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Novatek CBS Series

  • Page 2 All rights reserved printed in the United States of America. No part of this manual may be used or reproduced in any form or by any means, stored in data base or retrieval system, without prior written permission from NOVATEK Corporation.
  • Page 3 OPERATION AND MAINTENANCE MANUAL FOR CONTAINED BLAST SYSTEM WORKHEAD NOTICE FOR PROFESSIONAL USE ONLY WARNING IMPORTANT SAFETY INFORMATION ENCLOSED. READ AND UNDERSTAND THIS MANUAL BEFORE OPERATING THIS PRODUCT. IT IS YOUR RESPONSIBILITY TO MAKE THIS SAFETY INFORMATION AVAILABLE TO OTHERS THAT WILL OPERATE THIS PRODUCT. FAILURE TO OBSERVE THE FOLLOWING WARNING COULD RESULT IN INJURY.
  • Page 4  those recommended. Do not flush the tool or clean any parts with diesel  Use accessories recommended by Novatek fuel. Diesel fuel residue will ignite in the tool Corp. when the tool is operated, causing damage to ...
  • Page 5 Do not leave either the CBS Workhead or blast pot connected to a compressed air supply line. Turn off air and disconnect unit from the air line when it is not in use or before servicing. Follow the procedures outlined in this manual for safe and efficient use of the system. Use only Novatek’s recommended parts and attachments.
  • Page 6 11. Hazardous waste generated during operation, must be managed in accordance with OSHA regulations to insure safe handing, equipment cleaning and containment in all respects. 12. Do not pull or carry the equipment by the air or vac lines, use the lines as hands, close the doors on lines, or pull the lines around sharp corners or edges.
  • Page 7 NOVATEK CORPORATION or its authorized repair center. If a TOOL proves defective in material or workmanship within one year of purchase from NOVATEK CORPORATION, it should be returned to NOVATEK CORPORATION, transportation pre-paid. The return must be authorized by a RETURN MERCHANDISE AUTHORIZATION NUMBER (R.M.A.

This manual is also suitable for:

Cbs0015Cbs0020Cbs0021

Table of Contents