FOGIM TKLA-8420 Manual

TKLA-8420 LCD TV BRACKET WALL MOUNTING MANUAL
CAUTION
1. Please read this manual carefully before installation and install by following the instructions.
Please keep this manual for future reference.
2. The manufacturer shall not be responsible legally for any damage to this product that results from accident, abuse,
misuse, natural or personal disaster, or any unauthorized disassembly, repair or modification.
3. The design of the wall mount bracket is designed for installing and removing easily. The manufacturer shall not be liable
to the damage of equipment and personnel injuries due to human factors or natural disaster, such as earthquake
and hurricane.
4. The wall mount bracket must be installed by professional personnel.
5. At least two persons are needed to install or remove the product in order to prevent from any hazard caused by
falling objects.
6. Please check carefully before installation the area where the wall mount will be installed.
Avoid any place with high temperature or humidity or any place where will contact water.
Do not install the product close to the vents of air conditions and avoid dusty and fumy place.
Do not install on inclined wall and irregular surface. Please install on vertical wall.
Do not install at place subject to vibrations and shocks.
7. Please make sure the space around the display is enough for installation.
8. Please make sure the wall is strong enough to sustain the weight at least four times the total weight of the display and
the wall mount bracket.
Also make sure the wall could survive the earthquakes and other shocks. To ensure safety and avoid accidents, please
choose the durable and highly safe place.
9. Do not modify any accessory, design or structure. Do not use broken parts. Contact the local distributors if there is
malfunction or fault.
10. Tighten all screws (do not screw with excess force to prevent the screw, thread, wall mount bracket and the display
from damage).
11. The maximum weight of panel display or plasma TV the wall mount bracket can tak
12. Once the wall mount bracket is removed, the drilled holes and bolts will be left on the wall or the applied position.
Stains may occur after long term use.
13. To the extent of permitted by applicable law, the manufacturer disclaims any implied warranty of merchantability or
fitness for a particular purpose. In no event will the manufacturer be liable to the purchaser or to the user of the
product for any damages, expense, lost revenues, lost savings, lost profits, or any other incidental or consequential
damages arising from the purchase, use or inability to use the product, even if the manufacturer has been advised
of the possibility of such damages.
14. Specifications are subject to change without notification.
COMPONENTS
Wall Mount--1PC
Washer--4PCS
A
Hex Lag Bolt--4PCS
E
Screw: M6*15L--4PCS
B
Concrete Anchor--4PCS
F
Screw: M5*15L--4PCS
e is 60kg (132lbs.)
C
Bracket--1Pair
G
Screw: M6*8L--2PCS
D
H