Download Print this page
Hide thumbs Also See for 45179:

Advertisement

Quick Links

SAFETY WARNINGS
1.
Follow the information on the warning label appearing on the upper bunk end structure
and on the carton... Do not remove warning label from bed.
2.
Alway use the recommended size mattress or mattress support, or both, to help prevent
the likelihood of entrapment or falls.
3.
Surface of mattress must be at least 5 inches below the upper edge of guard rails.
4.
Do not allow children under 6 years to use the upper bunk.
5.
Prohibit more than one person on upper bunk.
6.
Periodically check and ensure that the guardrail, ladder, and other components are in their
proper position, free from damage, and that all connectors are tight.
7.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8.
Always use the ladder for entering and leaving upper bunk.
9.
Do not use substitute part. Contact the manufacturer or dealer for replacement part.
10.
Use of night light may provide added safety precaution for a child using the upper bunk.
11.
If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed
should be placed against the wall to prevent entrapment between the bed and the wall.
12.
Always use guardrail on both long sides of the upper bunk.
13.
The use of water or sleep flotation mattresses is prohibited.
14.
Keep these instruction for future reference.
15.
Strangulation Hazard - Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed, for example, but not limited to hooks, belts and jump rores.
16.
Trundle : Only use for mattress 6 inch.

Advertisement

loading

Summary of Contents for 2K Furniture Designs 45179

  • Page 1 SAFETY WARNINGS Follow the information on the warning label appearing on the upper bunk end structure and on the carton... Do not remove warning label from bed. Alway use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls.
  • Page 2 ~~ Note : Do Not Fully Tighten Screws until Fully Assembled ~~ Upper legs 2pcs Upper leg 1pc Upper leg 1pc Upper side panels 2pcs Drawer bottom panels 3pcs Bottom left panel 1pc Bottom right panel 1pc Slats 22pcs Front guard rails 2pcs back guard rails 2pcs Upper front side rail 1pc Upper back side rail 1pc...
  • Page 3: Parts List & Illustration

    PARTS LIST & ILLUSTRATION ~~ Note : Do Not Fully Tighten Screws until Fully Assembled ~~ Short wooden bars 2pcs Trundle front panel 1pc Drawer front panels 3pcs Trundle back panel 1pc Long wooden bar 1pc Drawer left side panels 3pcs Drawer right side panels 3pcs Drawer back panels 3pcs HARDWARE &...