Emerson WHITE RODGERS 1F95EZ-0671 Homeowner's Manual page 21

SETTING UP YOUR THERMOSTAT OPTIONS
CONFIGURATION MENU DESCRIPTIONS
Auxiliary Heat Cycle Rate
7
(if system is Heat Pump)
Compressor Lockout
8
Protection
System mode
9
confi guration
Compressor
10
Optimization
Display light
11
Temperature Display
12
Adjustment
Default setting is FA (Fast). If you desire a longer Aux heat cycle set to SL
(Slow).
Set by installer to match your system. Record the setting.
Set by installer to match your system. Record the setting.
Set by installer to match your system. Record the setting.
The display light is defaulted on so when any button is pressed the light will
illuminate the display. When set to Off, the light will not turn on.
The Easy Reader thermostat was accurately set at the factory. However,
if you want to change the temperature, you can adjust the reading by plus
or minus fi ve degrees. Your thermostat displays to match your previous
thermostat.
Blue Easy Reader Thermostat Homeowner's Guide • 21