Advertisement
Merry-Go-Round
Peg
Retainer
• Fit the peg on the merry-go-round into the playground
panel, as shown.
• Insert and snap the retainer into the hole in the bottom
of the playground panel.
Door Knob
Door
• Position the front panel on a flat surface with the
Fisher-Price logo on the door facing up.
• Insert the narrow end of the door knob into the hole in
the door.
© 1996 Fisher-Price, Inc., East Aurora, New York 14052
Playground
Hole
Panel
Front Panel
Narrow End
Assembly
Front Panel
• While holding the door knob in position, turn the front
panel over.
• Push down on the door near the door knob until the
door knob snaps into place in the door.
Slots
• Position the playground panel so that the stage side is
facing the front panel.
• Step on the front panel to hold it in place.
• At an angle, insert the curved tabs on the playground
panel into the slots in the front panel.
• Rotate the playground panel up.
4
Push Here
Door Knob
Playground Panel
(Stage Side)
Curved
Tabs
Front Panel
75975 1 75975-0920
Advertisement
