Download Print this page

Advertisement

Quick Links

RITO
EVOLUTION TRICYCLE MANUAL
Imported by: Smyths Toys HQ UC
Lyrr Building 1, Mervue Business Park,
Galway, Ireland, H91K4HV
Manufactured by:
Jiaxing Huatianxiang Bike Factory Co.,ltd
No.469 Hefeng Road,Jiaxing, Zhejiang,China

Advertisement

loading

Summary of Contents for QPlay RITO

  • Page 1 RITO EVOLUTION TRICYCLE MANUAL Imported by: Smyths Toys HQ UC Lyrr Building 1, Mervue Business Park, Galway, Ireland, H91K4HV Manufactured by: Jiaxing Huatianxiang Bike Factory Co.,ltd No.469 Hefeng Road,Jiaxing, Zhejiang,China...
  • Page 2: Product Features

    Product Features EVOLUTION TRICYCLE MANUAL WARNING! • This product is not a stroller and does not meet the safety requirements for strollers. Do not use as a mean of transport. • Do not use on or near roads. • Children should be supervised at all time. •...
  • Page 3 Assembly Instructions Follow the instructions step by step STEP 1 STEP 2 STEP 3 STEP 6 STEP 7 Take off the screw under the front Make sure that the freewheel Insert the front wheel (E) into the Insert the backrest (B) into the frame (A) making sure that Lock the backrest into place with the fork (H), then install the fender (I) switch is on the right hand side of...
  • Page 4 Assembly Instructions Folding the Trike Special folding mechanism makes it convenient for traveling Follow the instructions step by step 1. Press and hold the red reclining 2. Loosen the lock wrench for the 3. Press the red button on the STEP 9 STEP 10 button on the back of the backrest...
  • Page 5: Reclining Backrest

    Product Features Product Features Rear foot break for parents Reclining backrest Press and hold the red button on the back of the backrest and pull up to recline the seat. Adjustable telescopic push bar Front freewheel Twist the red switch on the front wheel to turn on / off the freewheel system.
  • Page 6 Small backrest installation 12M+ 24M+ Remove the screw from the position shown. Remove the backrest ,middle foot rest and push bar 36M+ Finished Insert the small backrest and tighten the screw...