White Rodgers 90 Operating Instructions Manual page 10

day you wish to change and follow
Steps 10, 11 & 12. You can also copy
the program from one day to another.
To copy, press /COPY. The
HOLD
display will show COPY, and all the
other days of week will be flashing.
Press /COPY again to copy the
HOLD
day into the rest of the week or press
TIME or TIME
FWD
you reach the day you want to copy to
and press /COPY.
HOLD
10.Press TIME or TIME
FWD
to set the time on the display as
selected in your HEATING or
COOLING SCHEDULE. Be sure to
check the AM or PM on the display.
11. Press the red or blue
key to adjust the temperature to match
your schedule. If you want the fan ON
continuously during this period, press
.
FAN
12.Press PROGRAM
VIEW
OCCU on the display will change to
UNOC. Repeat steps 10 and 11 to
enter time and temperature for this
period.
13.Press PROGRAM
MON to TUE and show the OCCU
time and temperature settings. Repeat
steps 10 through 12 to enter times and
temperatures for this day.
until
BACK
14.Continue through the entire
schedule, entering time and tempera-
ture for each day and period. When
BACK
you are satisfied that your program
matches your schedule, press PRO-
GRAM
complete for this mode and your
program is running.
15.To program the other mode, repeat
the procedure from step 7.
one time.
to change
ADV.
. Programming is now
RUN
8