Advertisement
Operation Steps
1. CONNECT TO POWER
Connect the power adapter to power socket and [DC POWER IN] on top of the device.
When the power is connected, the ON/OFF LCD shows whether the unit is in operation.
'ON' shows the SensaMist
operational state. For example; if the diffuser is set from 8:00 to 10:00, 'ON' shows the
machine is working during this period. 'OFF' is in the opposite state.
The WORK/PAUSE LCD can set the SensaMist
pause-time. This can be used to control the SensaMist
according to different preferences. 'WORK' shows the machine is working, 'PAUSE ' is to
stop working.
2. WORKING PERIODS SETTING
The SensaMist
mains scent diffuser can be set to four different work periods. Workdays
™
can also be set to users' requirements.
[MODE]
[SET]
adjust
buttons
A. Set the Time
Set the correct system time according to your time zone using the 24-hour clock.
1) Press [SET], the hour figure flashes, press the adjust
2) Press [SET], the hour setting is saved and the minute figure flashes, press the adjust
buttons to adjust the minute.
3) Press [SET], the minute setting is saved and the work day figure flashes, press the adjust
buttons to set the correct day.
4) Press [SET] to finish setting up the system time and work day.
mains scent diffuser is in operational state, 'OFF' is out of
™
To change from one event to another event.
Press to choose your setting, (time setting (hour, minutes),
work days etc).
Use to adjust the time data, scent concentration data and the
choice of workdays.
mains scent diffuser to working-time or
™
fragrance oil concentration
™
buttons to adjust the hour.
Advertisement
