Advertisement
Attach upper door track 10 to the two bolts left ready in section 2 with nuts (position 10 vertically and push
it through the central section between the two glaze bars. Twist 10 so that the slots in the mounting bar
are facing upwards). Slide doors into upper track (10) and lower track (184), adjust the height of 10 until
the door is running smoothly leaving enough room for the pane of glass above.
10
2530
167
380
300
n/a
10
Two brackets are supplied
1
to help support each end
of the door track '10' when
the doors are in the open
position.
2
punched into the rear face
of '10' at each end.
correspondent
located in each roof corner
2
bars to accommodate the
bracket '300'.
A hole is pre-
A
hole is
Carefully
remove
2
nuts from door rear
and attach door stop/
handles (see diagrams
below). Re attach the
nuts!
184
Advertisement
