Troubleshooting - LAUNCH TECH CCH-101 Manual

LAUNCH

Troubleshooting

After 15 seconds when the burner is
activated, the malfunction indicator
lamp in the burner illuminates.
The burner emits black smoke after
being ignited.
Motor in burner doesn't run.
The air flow is low when spraying
paint
Temperature increases too slowly
when baking paint
Main blower couldn't be activated.
PDF 文件使用 "pdfFactory Pro" 试用版本创建
Malfunction
1.Gasoline tank is empty.
2. Air leaks from the joint of oil pipe
3.The Filter in the oil-in pipe is too dirty.
4.The electric eye is too dirty.
Air door is too small.
1.Time set on the time izndicator is up.
2.Temperature set on the temperature
indicator is up.
3.Oil pump gets stuck
1.The first filter cotton is choked up.
2.Air valve is open.
Air valve is closed .
1.Fuse is molten.
2.Electric machinery is broken.
Possible Cause
www.fineprint.com.cn
Paint Booth
Solution
1.Fill gasoline tank .
2.Reconnect the oil pipe.
3.Clean filter.
4.Demount the electric control
box and wipe out the electric
eyes.
Adjust the air door until there is
no black smoke.
1.Reset the time.
2.Rset the temperature.
3.Check oil pump to see if
something or oil residue
blocks up the oil pump.
1.Clean the first filter cotton.
2.Check air valve to see if it is
active.
Check air valve to see if it is
active.
1.Replace the fuse.
2.Replace the electric
machinery.