Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in
the back of the manual (or month and year of purchase if product has no number). Keep this manual
and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2018 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19a
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Braun 56163
Summary of Contents for Braun 56163
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
- Page 2 Work Light at temperatures below 40° F. other USB power source to begin charging. Charging Port Cover Charging Input Port Battery Indicator Lights Output Port 100% Figure A Page 2 For technical questions, please call 1-888-866-5797. Item 56163...
- Page 3 2. Remove four screws from back of Battery Work Light, then remove cover. Wires 3. Disconnect Battery wires from circuit board. 4. Remove Battery. Figure C: Work Light open for Battery removal Item 56163 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
Need help?
Do you have a question about the 56163 and is the answer not in the manual?
Questions and answers
my braun LED rechargeable worklight won't charge. Two lights go on briefly (without blinking), but then turn off. I've tried several different cables. Please advise.
The Braun 56163 LED rechargeable worklight may not charge due to several possible reasons:
1. The USB cable is not properly connected to the worklight or power source.
2. The battery is depleted and needs replacement.
3. The internal battery wires may be disconnected or damaged.
4. The battery may be faulty or has reached the end of its lifespan.
5. Charging was attempted in temperatures above 140°F, which can damage the battery.
6. Physical damage or improper use may have affected charging components.
Check all connections and the condition of the battery. Avoid exposing the device to excessive heat.
This answer is automatically generated
What type plug in can I use
The Braun 56163 1250 Lumen Rechargeable Work Light can use an AC adapter charger with a DC barrel connector. Compatible adapters include those from brands like FASPKOW and YUSTDA, which support 100-240V AC input and offer short circuit protection, over-current protection, and over-voltage protection.
This answer is automatically generated