LX Navigation Era Series User Manual page 77

LX Era
Connectivity
6. . . Establishing a Bluetooth connection
To set up a Bluetooth connection, go to Setup > Network > Wireless mode and choose
Bluetooth server.
Exit the Wireless mode setup by going back and open the Wireless setup menu. You will nd
your device's Bluetooth name and password, needed fro establishing a Bluetooth connection.
Now take your Oudie, go to Menu > Settings > Input > Bluetooth... and press Lookup. The
Oudie will now search for nearby Bluetooth devices. Once your Era appears (LX Era
select it and press pair. When prompted for a password, type in '
The following settings should be set:
• Port - COM : (Bluetooth)
• Speed - 8
• Parity - None
• Bits - 8
Press OK and the Oudie will exit back to the main screen.
6. . . Setting up the Era
To set up Era NMEA communication, needed for the proper functioning of SeeYou mobile, go
to Setup > NMEA and set the NMEA baude rate to 8
Now check the following tick boxes:
• GPGGA
• GPRMC
• GPRMB
• LXWPx
Now go to the Oudie's Menu > Settings > Hardware > Device and select 'LX navigation'
(pending).
If you go to the Terminal, you should see communication owing, in the form of NMEA
sentences.
Now your devices are communicating.
The Oudie will receive various ight parameters (IAS, vario info, Flarm objects and warnings,
GPS, etc.) from the Era, and the Oudie will be able to send a ight declaration to the Era and
control various ight parameters, like MC, bugs and ballast.
Device manual
Document name:
Document revision:
• Stop bit -
• Set DTR - Checked
• Set RTS - Checked
.
• LXDT
• LXBC
• PFLAx
Public
LX EUM
xxx),
'.
R