SAFETY & WARNINGS • Make sure the battery is fully charged before use. • After use, lock the safety buckle to prevent misuse. • Do not attempt to modify or disassemble this product. • Do not use this product around flammable liquids or gases. •...
OPERATION Connect the inflation tube to the inflation inlet (Fig .1) Fig.1 Secure the inflation tube to the inflation inlet by tightening the collar (Fig.2) Fig.2 Ensure the tool is stable and confirm the pressure required before powering it on. Open the safety buckle.
SPECIFICATIONS Power 120W Input voltage 12.6V Discharge time 30 minutes Battery capacity 2200mA TROUBLESHOOTING Problems Causes and solutions May be caused by low battery; recharge the unit as soon as possible Unit will not power on Failure to pre-set tire pressure or wait for the display to stop flickering the desired pressure has been set.
Page 8
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...