Operating Your Chipper Shredder Vacuum - White Outdoor Yard Boss 550 Operator's Manual

Throttle Control Lever (Not Shown)
The throttle control lever is located on the engine. It
controls the engine's speed and stops the engine. See
separate engine manual packed with unit for details.
Starter Handle (Not Shown)
The starter handle is located on the engine. Pull the
starter handle to start engine.
Drive Clutch
Control
Bag
SECTION 4: OPERATING YOUR CHIPPER SHREDDER VACUUM
WARNING: Read, understand, and follow
all instructions and warnings on the
machine and in this manual before
operating.
Always wear the safety glasses provided
with this machine during operation or
while performing any adjustments or
repairs. Thrown objects which ricochet
can cause serious injury to the eyes.
Gas And Oil Fill-Up
Service the engine with gasoline and oil as instructed in
the separate engine manual packed with your chipper
shredder vacuum. Read instructions carefully.
Chipper
Chute
Caster Locks
Engine Controls
See the separate engine manual for the location and
function of the controls on the engine.
Stopping Engine
• Move throttle control lever to STOP or OFF
position.
• Disconnect spark plug wire from spark plug and
ground against the engine.
Nozzle
Figure 5
WARNING:
handling gasoline. Gasoline is extremely
flammable and the vapors are explosive.
Never fuel machine indoors or while the
engine is hot or running. Extinguish
cigarettes,
sources of ignition.
Starting Engine
• Attach spark plug wire to spark plug. Make certain
the metal cap on the end of the spark plug is
fastened securely over the metal tip on the spark
plug.
• Make certain drive clutch control is in the
disengaged (released) position.
• Engines with choke lever:
Move choke lever on engine to CHOKE position. (A
warm engine may not require choking).
7
Nozzle Door
Adjustment Lever
Use extreme care
cigars, pipes, and
when
other