Peri PBT-PK Instructions

INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
THIS PRODUCT USES EXTREMELY FLAMMABLE GAS
AND IS VERY DANGEROUS IF NOT USED CORRECTLY.
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND
KEEP THEM FOR FUTURE REFERENCE.
CHILDREN
• Children are precious. Do not let them near this gas torch, EVER!
PERSONAL PROTECTION
• Always wear protective gloves.
• Avoid contact with eyes or skin. In case of contact with eyes, rinse
immediately with plenty of water and seek medical advice. For
skin contact, flush with large amounts of water.
• Do not breathe gas, fumes, vapor or spray. If inhaled, move to
where there is fresh air.
• Radiant energy can harm your eyes. Wear glasses or goggles
having appropriate UV protection.
VENTILATION
• Work only in well-ventilated areas. The fumes from fluxes,
cadmium plating, brass, zinc and galvanized metal are toxic.
• Do not use in a confined work area or enclosed space.
CYLINDERS
• Keep cylinders away from heat or flame.
• Keep cylinders out of reach of children.
• Avoid prolonged exposure to sunlight.
• Do not store in temperatures above 50°C.
• Do not use if the cylinder is leaking, or the torch is damaged or
malfunctioning in any way.
USING THE TORCH OUTDOORS
• Be cautious when using the torch outdoors on sunny or windy
days.
• Bright sun makes it difficult to observe the flame.
• Wind may misdirect the flame towards you or other unintended
areas or objects.
• Wind may further cause sparks to come in contact with unintended
combustible materials.
GENERAL USE
• Never use torch as a cigarette lighter.
• Never use the torch to strip lead paint.
• Never use the torch on or near an aerosol can or any container that
contains or has previously contained chemicals, or flammable
materials, liquids or gases. Heating these is extremely dangerous,
especially after they have been emptied.
• Be careful around motor vehicles or any gasoline-fired products
and beware of any hidden fuel lines and tanks.
• When thawing pipes, be careful not to overheat surrounding parts.
• Heating a surface may cause heat to be conducted to adjoining
surfaces that may be combustible or become pressurised when
heated. Always check to make sure no unintended parts or
materials are being heated.
Model: PBT-PK
(for Propane)
BRASS TORCH KIT
KEEP THESE INSTRUCTIONS
Newfield Group
42 Izone Drive, Rolleston, New Zealand
0800-600-789
www.perigas.co.nz
BRASS BURNER
TUBE & TIP
Allows quicker heating
FLAME CONTROL
VALVE
Controls the flame strength
CGA600 CONNECTOR
& VALVE INSERT
Connects to all common brands
December 2018