Advertisement
1
• Identify the outside surface of each wheel. (See the inset
above to identify the inside surface of the rear [large]
wheels. The inside surface of the front [small] wheels are
marked IN.)
• Before applying labels to the wheels, make sure your
hands are clean and dry and wipe each wheel with a
clean, dry cloth.
• Apply label 23 to the outside surface of each rear wheel.
Apply label 2 to the outside surface of each front wheel.
For best results, avoid repositioning a label once it has
been applied.
2
"Hubcap" Side
Bushing
Plate
Washer
Side
Short Leg
Note:
The front axles are not interchangeable and are marked
A (right) and B (left). Identify the left front axle (B).
• Fit a washer onto the short leg of front axle B.
• Fit a bushing, plate side down, onto the short leg of front
axle B.
• Fit a front (small) wheel, "hubcap" side up, on the short leg of
front axle B.
Inside
Outside
Rear Wheel
A
A
Front Axle
Right "A"
Front (Small)
Wheel
Front Axle
Left "B"
Front Axle B
Assembly
3
Barrel
Side
• Fit a bushing, barrel side down, onto the short leg of
front axle B.
• Place a cap nut in the cupped end of the cap nut
assembly tool.
• Hold the cap nut against the end of the short leg. Tap the
cap nut assembly tool with a hammer to secure the cap
nut on the end of the short leg of front axle B.
4
B
B
• Fit a washer on the long leg of front axle B.
3
Cap Nut
Assembly Tool
Cap Nut
Bushing
Front Axle B
Washer
Long Leg of
Front Axle B
Advertisement
