Table of Contents
Advertisement
Quick Links
PLEATED BLINDS
Mounting instructions
Pleated blind Duette VS1 / VS2
Dear Rollo Rieper customer,
This pleated blind system was made to measure especially for your windows..
If you have purchased a VS1 please read the instructions from point 1, if you have a VS2 start at point 2.
Quality materials and a perfect design ensure a long service life and will provide much joy
with the purchased product.
Please read the following instructions carefully before installation.
Rollo Rieper
Humboldtstraße 125-129
28203 Bremen
Germany
Tel. +49(0)421 – 700 366
Fax. +49(0)421 – 700 288
info@rollo-rieper.de
www.rollo-rieper.de
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rollo Rieper Duette VS1
Summary of Contents for Rollo Rieper Duette VS1
- Page 1 Mounting instructions www.rollo-rieper.de Pleated blind Duette VS1 / VS2 Dear Rollo Rieper customer, This pleated blind system was made to measure especially for your windows.. If you have purchased a VS1 please read the instructions from point 1, if you have a VS2 start at point 2.
- Page 2 1. VS1 Mounting carriers A. Make sure to set the position of the carrier as close as possible to the control. Select the same mounting distance of the carrier on the opposite side. Please note a max. carrier spacing of about 50 cm. B.
- Page 3 Then plug the caps on the clamping shoes. Slide on control handle. Optional wall / frame installation with tension bracket: Assemble the tension bracket perpendicularly below the pleated blind and screw on the clamping shoes. Then push on the caps. Spannschuhe auf.
- Page 4 Care instructions General Our pleated blinds are dust- and dirt-resistant due to the coating on both sides. However, if you want a cleaning, so pay attention to our specific requirements set out in the cleaning symbols from our collections. Brush Soiling, e.g.
Need help?
Do you have a question about the Duette VS1 and is the answer not in the manual?
Questions and answers