Subscribe to Our Youtube Channel
Summary of Contents for Jetblack Safety JBA-015
- Page 1 ACM-0030/230 ISSUE 5 BLOWER-POWERED PERSONNEL CLEANING STATION INSTALLATION OPERATION MAINTENANCE...
- Page 3 GENERAL SAFETY CONTENTS INFORMATION PAGE YOUR NEW CLEANING STATION UNIT SAFETY INFORMATION INSTALLATION INSTALLATION (RAIN COVER) (ELECTRICAL) WARRANTY MAINTENANCE COVER & SERVICE USEFUL WARRANTY COVER REFERENCES USEFUL REGULATIONS REFERENCES & RECYCLING...
-
Page 4: General Safety Information
(RPE) and PPE. Users must wear appropriate eye, ear and respiratory protection at all times whilst operating the JetBlack Safety Cleaning Station. The JetBlack Safety Cleaning Station is compliant with the Occupational Safety and Health Act of 1970 (OSHA) when used in conjunction with the OSHA compliant chip guard which is available to customers. - Page 5 CLEANING STATION SAFETY INFORMATION • These units are not designed for area installation only and must not be continuous use used in ATEX zones or near the presence of explosive substances • The Cleaning Station is suitable for safe Wall Mounted Units •...
- Page 6 YOUR NEW UNIT Wall-Mounted Unit Features Portable Unit Features Equipment Arrival & Inspection If there are any shortages, discrepancies or damage to your product upon delivery of your Cleaning Station, please immediately contact the Distributor that you purchased it from. Nozzle Assembly Detachment •...
-
Page 7: Installation
INSTALLATION (ELECTRICAL) • Installation, commissioning and electrical • All nominated installers will be installation should only be performed by a responsible for proper and safe trained service person and in accordance installation, as well as for with the latest IEE regulations safe operation •... - Page 8 INSTALLATION (RAIN COVER) • Locate fixings suitable for the substrate holder on the backplate you are mounting to and secure the • Lift cover over the Cleaning Station and Cleaning Station using the four holes in locate the slots on the rear face over the the baseplate.
-
Page 9: Maintenance And Service
MAINTENANCE & SERVICE The following points must be observed when performing any maintenance or service operations to the Cleaning Station: • Filters – we recommend that the filter • The power supply must be disconnected is inspected at least once a month, and and secured against restoration replaced after a maximum of 3 months. -
Page 10: Warranty Cover
WARRANTY COVER JetBlack Safety is a trading name of Air Control Industries Ltd (ACI). Subject to ® the restrictions mentioned below, your equipment Warranty covers the repair or replacement, free of charge, of parts acknowledged to be faulty by Air Control Industries Ltd (ACI), as well as the labour necessary to repair the equipment for twelve months from the date of shipment. - Page 11 WARRANTY COVER The Warranty Does Not Cover • Maintenance and servicing operations • The replacement of parts that are subject necessary for the correct operation to normal wear associated with use of the of the equipment, mentioned in the equipment, if this replacement is not the Maintenance sections of this document.
-
Page 12: Useful Reference
USEFUL REFERENCE Cleaning Station Spare Parts List Part Number Part Description JBA-015 Moulded Cleaning Station with full OSHA nozzle assembly (includes dip-moulded nozzle) JBA-015/MN01/BLACK Dip-moulded OSHA nozzle fitting Flexible hose assembly for wall-mounted Cleaning Station JS-009/1500 1.5m/56” in length Flexible hose assembly for portable Cleaning Station JS-009 2.5m/98”... -
Page 13: Troubleshooting
USEFUL REFERENCE Trouble Shooting Malfunction Possible Cause Remedy This item MUST be changed regularly. Dirty or contaminated Low Airflow We recommend the filter is changed every blower filter 3 months subject to operating conditions. Damaged hose Replace damaged hose Check all ducting and air delivery devices Blockage in air ducting for blockages Irregular /... - Page 14 REGULATIONS & RECYCLING Regulations The JetBlack Safety Cleaning Station is designed in accordance with the following directives: ® Conforms to OSHA Standard 29 CFR 1910.242 (b) EN 55014-1 EMC Directive (Emissions) EN 55014-2 EMC Directive (Immunity) EN 60335-2-69 Low Voltage (Electrical Safety Testing) EN 61000-3-2 EMC - Limits for harmonic current emissions EN 61000-3-3...
- Page 16 Air Control Industries Ltd Weycroft Avenue, Millwey Rise Industrial Est, Axminster, EX13 5HU, United Kingdom Tel: +44 (0)1297 529242 Fax: +44 (0)1297 529241 uksales@jetblacksafety.com www.jetblacksafety.com/uk Air Control Industries Inc 76 Augusta Rockland Road, Windsor, ME 04363, United States Tel: 207-445-2518 Fax: 207-445-2497 sales@jetblacksafety.com www.jetblacksafety.com...
Need help?
Do you have a question about the JBA-015 and is the answer not in the manual?
Questions and answers