Related Manuals for aarke Carbonator II
Summary of Contents for aarke Carbonator II
- Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Aarke Carbonator II cerca il tuo prodotto tra le migliori offerte di Articoli per la Cucina Carbonator II Region User Guide...
- Page 3 Some people like a real carbonation bite and some want a milder effervescent taste. The Aarke sparkling water maker is carefully crafted in the finest materials, designed and tested for best possible quality and safety. However, products that include gas and high pressures should always be handled with care.
-
Page 4: Included In The Box
User guide English INCLUDED IN THE BOX Sparkling water maker This book Water bottle PRODUCT COMPONENTS Lever Water bottle socket Nozzle Gas cylinder compartment Spill tray grid Spill tray Foot... - Page 5 User guide English ATTACHING THE GAS CYLINDER Remove the spill tray grid and then carefully lay the carbonator down on the side with the lever upwards. Unscrew the plastic sealing from the cylinder top. Carefully insert the gas cylinder through the hole at the bottom.
- Page 6 User guide English THE CARBONATION PROCESS 1. Fill the water bottle 2. Attach the water bottle Rinse the water bottle with luke warm water Screw the water bottle into the water bottle before you use it for the first time. Fill the socket.
- Page 7 Adhering to the maintenance tips will ensure that you enjoy (the look of) your Aarke Carbonator for a long time. To clean your carbonator we recommend using a micro fibre cloth and water. If needed you could use some mild soap. Do not use strong detergents or cleanser with abrasive substance.
- Page 8 User guide English RINSING THE WATER BOTTLE To clean the Aarke water bottle use clean lukewarm water with a mild detergent. If using a dishwasher brush, make sure the brush is intended to be used for cleaning plastic bottles and do not leave any scratches.
-
Page 9: Safety Guidelines
User guide English SAFETY GUIDELINES Never carbonate anything other than plain water When carbonating, a small amount of liquid could bubble up through the valves. If the water contains sugar or other compounds the valves could start malfunction and the product could potentially be dangerous to use. - Page 10 Due to the laws of physics, the pressure in the gas cylinder depends on the outside temperature. The Aarke sparkling water maker is optimized for using the gas cylinder at room temperature. If the cylinder gets too hot, it could be dangerous to use the machine.
- Page 11 User guide English Do not transport the sparkling water maker with the gas cylinder attached Always unscrew the gas cylinder during transport. Do not use the water bottle after the expiry date After the bottle has expired, the plastic may have weakened a little bit and for safety reasons the water bottle should be replaced with a new one.
- Page 12 User guide English Never inject gas into an empty water bottle Using an empty water bottle may lead to a higher pressure in the water bottle which could result in a safety risk. Keep the sparkling water maker away from children Children are way too creative to use this product.
-
Page 13: Warranty
English WARRANTY The Aarke sparkling water maker is designed to meet and exceed your expectations in terms of quality and safety. Great care has been taken to ensure that it was delivered to you in a perfect working condition. However, if your carbonator malfunctions within 2 (two) years (or according to specific country laws) from date of purchase, and we determine the problem is due to faulty workmanship or materials, Aarke will repair or replace the product free of charge. -
Page 14: Troubleshooting Guide
3. - If nothing of this helped, please write an email to support@aarke.com and describe your problem. - Make sure you are holding the lever down until you 2. Gas is flowing into the bottle when hear a buzz from the valve. - Page 15 Checking status of gasket Unscrew the cylinder. Turn the Aarke machine up side down. Look into cylinder compartment. Look if there is a black gasket (a black ring) around the brass pin and that it seems to be in place correctly.
-
Page 16: Technical Specifications
User guide English TECHNICAL SPECIFICATIONS SPARKLING WATER MAKER WATER BOTTLE Height: 414 mm Height: 265 mm Width: 153 mm Diameter: 85,5 mm Depth: 258 mm Weight: 209 g Weight: ≈1450 g Volume: ≈ 0,8 l (up to the filling line) Compatible with standard gas cylinders approved for use with carbonators from all major brands worldwide*. - Page 18 AARKE AB ERSTAGATAN 24 116 36 STOCKHOLM SWEDEN WWW.AARKE.COM...