AUDIO SETTINGS
You can set your preferred audio settings by entering [AUDIO CONTROL] menu.
Example of Subwoofer Level Setting
1
Press AUD to enter [AUDIO CONTROL].
2
Turn the volume knob to select [SUBWOOFER SET], then press the knob.
3
Turn the volume knob to select [SW SET ON], then press the knob.
4
Turn the volume knob to select [SUB-W LEVEL], then press the knob.
5
Turn the volume knob to adjust the subwoofer level, then press the
knob.
6
Press and hold
to exit.
Note:
You need to set [SWITCH PREOUT] to [SUB-W] in standby mode before you can
make the above settings.
8
OTHER INFORMATION
For playback operations of AUX source, refer to the INSTRUCTION MANUAL
on the following website: <www.kenwood.com/cs/ce/>
Note for specifications
Speaker Impedance:
4 Ω — 8 Ω
Operating Voltage:
12 V DC car battery