Advertisement
Instructions For Magnetic Locking Devices
Important : Please Read Before Attempting To Install Magnetic Lock
A. Handle the equipment with care, damaging the mating surfaces of the magnet or
armature plate may reduce locking efficiency.
B. The magnet mounts rigidly to the door frame. The armature plate mounts to the
door with hardware. Kit provided that allows it to pivot about its center to com
pensate for door wear and misalignment.
C. Template use must take place with the door in its normally closed position.
D.Before installing,please add the threadlockerto all screws. Firmly tighten the screws to Avoid
fastening loosen.
Typical Insta"ation:
DOOR FRAME
DOOR FRAME
DOOR FRAME
Plate
II..!::::=::;:=~~~
Stringer Door
L---Armature
I
Mou nti ng
-Magnet
-Magnet
Magnet
'----Armature
Plate
Plate
LArmature
Plate
Armature Plate Mounts To The Door
r-----Door
Nut
~Spacer
Armature Plate
I-::=waSher
I d
~/
Door
~c::::::6-
'::t.-,
-:.,..----=:--Hole For Guide Pin
-=----.::.....,."::--:::;::o~~-
Hole For Nut
1.0i!~=--~~;:-:::'---+--
Rub be
r
Was her
~Illi~;;:..--<"------i-
Steel Washer
----+-Armature Plate
35mm
' - - - - - - - - -
Guide Pin
**Important: Fix the armature plate not too tightly, and make the rubber washer more flexible, in order
to make the armature plate automatically adjust its proper position with the magnet.
Advertisement
