Advertisement
Quick Links
Advertisement
Summary of Contents for Thales Ezio BLE
- Page 1 How to pair Ezio BLE reader in Bluetooth under Mac OS X 10.14 Mojave and up using GBDM 3.0 OPEN...
- Page 2 Pairing instructions (first time connection) 1. Ensure that Bluetooth is turned on. 2. Start the device (press on the [OK] button) and ensure the device is set in Bluetooth mode (i.e. the Bluetooth switch is in the upper position). 3. Press on the [MENU] button followed by key [1] to enter Bluetooth pairing mode. OPEN...
- Page 3 4. Open the Bluetooth Devices Manager under Applications folder from Finder. 5. Click the No Reader from GBDM application. OPEN...
- Page 4 And go to click on Pairing, if you enable pairing on the reader and enable Bluetooth button you should see your reader appearing in the Pairing list: 6. Click on the reader name “Ezio BT Reader XXXX” (XXXX is the last 4 digits of the S/N number printed on the back of the device).
- Page 5 8. You should see reader name “Ezio BT Reader XXXX” appear in “Connected to:” field: 8. Ensure that the device is listed under “Connected Reader”. 9. To allow GBDM application to start at Login and Keep it in Dock, double-click on the icon and check “Keep in Dock”...
- Page 6 Normal Connection Mode (when the device and Mac were already paired): 1. Start the device in Bluetooth mode. 2. Verify that the device automatically enters connected state Note: The “Bluetooth connect” message in the main display will disappear after a few seconds.
Need help?
Do you have a question about the Ezio BLE and is the answer not in the manual?
Questions and answers