Page 2
PCO asks you to carefully read and follow the instructions in this manual before using the pco.kaya frame grabber. For any questions or comments, please feel free to contact us at any time. telephone: +49 (0) 9441 2005 50...
Komodo Frame Grabber for PCO cameras with Camera Link HS interface. For further description of Kaya Frame Grabber and Software see also Kaya manuals. During PCO Software installation, Camera Link HS interface must be selected to access PCO cameras via Kaya Frame Grabber. Availability Available for these camera models: pco.edge with Camera Link HS interface...
Do not point the laser beam at persons. Manipulations of the laser device are not allowed. ELECTRIC SHOCK WARNING DUE TO VOLTAGE PARTS INSIDE Risk of injury due to electric shock. Always pull the main plug before opening the computer. pco.kaya frame grabber installation manual 1.01...
Instructions for installing and testing the Kaya Komodo Camera Link HS grabber card. This card is required to be able to use a PCO camera with Camera Link HS interface. Installation must be performed by a technician, because high voltages can occur on the device.
Click Frame Grabber - Hardware Information Check the following values: Firmware version: Komodo II : 4.1.7 or higher Komodo : 4.21.9 or higher PCIe generation: 3 (see PCI Express Generation 2/3) PCIe lanes: 8 pco.kaya frame grabber installation manual 1.01...
Page 9
If the Frame Grabber is installed in a PCIe slot with only Gen2 capability and/or with only 4 PCIe Generation 2/3 lanes, memory bandwidth for image transfers is limited and images might be lost. Vision Point software will inform you if your system has limitations: pco.kaya frame grabber installation manual 1.01...
How to update the firmware of a Kaya Frame Grabber card. Select Device Control - Firmware update... Select proper firmware update file Click Next and wait until the update process is finished Power down your computer. A restart is not sufficient pco.kaya frame grabber installation manual 1.01...
Page 11
5 Update Firmware of the Grabber Do not unplug and/or switch off your computer during the update. pco.kaya frame grabber installation manual 1.01...
Page 12
Centennial Tower, Level 34 Singapore, 039190 +65 6549 7054 info@pco-imaging.com pco-imaging.com china Suzhou PCO Imaging Technology Co., Ltd. Room A10, 4th Floor, Building 4 Ascendas Xinsu Square, No. 5 Xinghan Street Suzhou Industrial Park, China 215021 +86 512 67634643 info@pco.cn pco.cn...